Enhance your robotic manufacturing setup with our MSP Automation Screw Presenter. This simple machine operates in combination with automation & robotic screw driving systems. The compact size allows easy installation. The cost-saving device makes the assembly process more efficient by mechanically presenting a screw to a fixed pick-up point. Optimize resources, cut labor costs and increase production capacity with automation equipment.
MANUAL REV 1 (9/1/2025)
MSP-SERIES AUTOMATION SCREW PRESENTERS
Phone: 408.292.2214
www.mountztorque.com
MSP-SERIES AUTOMATION SC PRESENTERS
SERIES AUTOMATION SCREW
Rev 1 (9/1/2025)
The device is specifically engineered to integrate seamlessly with robotic and automated screw systems. It requires the electric screwdriver to be equipped with a vacuum attachment being dispensed from the screw presenter. systems. It requires the electric screwdriver to be equipped with a vacuum attachment to pick up screws The device is specifically engineered to integrate seamlessly with robotic and automated screw-driving to pick up screws
Power Switch
Lid
Function Adjustments
Plate Adjustment
Turntable
Container Lid Adjustments
Sensor Adjustment
Signal Wires (2 wires) come out from bottom of screw presente from bottom of screw presenter
AC Adapter: Do not use any other AC adapter other than the recommended accessory. not in use, be sure to unplug the AC adapter from the wall outlet during closing hours and if the machine will be left unused for any extended period of time. adapter other than the recommended accessory. When machine is e sure to unplug the AC adapter from the wall outlet during closing hours and if the machine will When machine is
Item # 144782 Model: Power Supply for MSP Screw Presenters (120V Power Supply for MSP Screw Presenters (120V)
Rail: Do not damage or oil the rail.
Signal Wires: Wiring Diagram for signal Wire *Located on the side of the screw presenter switch when screw is Present/Not).
Wiring Diagram for signal Wire *Located on the side of the screw presenter. (Open/close (Open/close
Operational Workstation Usage: Install the screw presenter on a level, stable work station that can support its weight and withstand the operating conditions. If the machine falls down or turns over due to improper installation, injuries or property damage may result. Have the device sent to Mountz service location for servicing. weight and withstand the operating conditions. If the machine falls down or turns over due to improper
Screws: Only use screw that are compatible with the individual screw presenter model. Do not use oily screws, dirty screws, or any screw other than those prescribed. Avoid overloading the screw presenter with too many screws. The level of the screws should be below the internal rail system. If too many screws are thrown in, orientation and transfer of the screw will be seriously affected.
The screw output is from 60 ~ 90pcs/min
MSP screw presenter container volume of 200ml. (to calculate screw capacity)
Functionality Adjustments
Feeding Speed Regulation – Menu A
Press down arrow for 3 seconds to select the first menu option
Feeding Speed Regulation – Menu A
Press the down arrow or up arrow to adjust the value
Range is A -1 to A-30
Press SET to save and navigate to the next menu selection
Vibration Motor Delay Stop Time – Menu B
If not already in the menu selection mode, Press Down Arrow for 3 seconds Press SET button one time to select the Vibration motor delay stop time – Menu B
Press the down arrow or up arrow to adjust the value
The range is 0.0 to 6.0 Sec (B – 00 – B – 60)
Increments are 0.5 sec
Press SET to save and navigate to the next menu selection
Time Delay Stop Feeding Motor – Menu C
f not already in the menu selection mode, Press Down Arrow for 3 seconds
Press SET button two times to select the Time Delay Stop Feeding Motor – Menu C
Press the down arrow or up arrow to adjust the value
The range is 0.0 to 8.0 Sec (C – 00 – C – 80)
Increments are 0.5 sec
Press SET to save and navigate to the next menu selection
Turn Table Speed – Menu D
If not already in the menu selection mode, Press Down Arrow for 3 seconds
Press SET button three times to select the Turn Table Speed – Menu D
Press the down arrow or up arrow to adjust the value
Range is D-1 to D-20
Press SET to save and navigate to the next menu selection
Counting Mode – Menu E
If not already in the menu selection mode, Press Down Arrow for 3 seconds
Press SET button four times to select the Counting Mode – Menu E
Press the down arrow or up arrow to adjust the value
E – 0 (Counting mode off)
E – 1 (Counting mode on)
Press the “SET” button to return to working mode
Testing and Servicing Torque tools go out of calibration with use. Calibrating a torque tool is a fine tuning process of bringing the tool back within its tolerance. Regular torque calibration of a hand screwdriver ensures accuracy, repeatable tool perf and adherence to international standards. We recommend a general once a year calibration interval. However, the user's organization must determine suitable intervals based upon equipment performance, application, degree of usage, and management Mountz Calibration and Repair Services Mountz Inc. features an experienced calibration and repair staff. Our trained technicians can calibrate and repair almost any tool. Mountz provides rapid service with quality that you can trust as we offer labs and repair facilities that can calibrate up to 20,000 lbf.ft. service with quality that you can trust as we offer two state-of-the-art calibration About Mountz Mountz, The Torque Tool Specialists ® , has been a leader in the torque tool industry for more than 60 years. Engineered in the Silicon Valley a globe, Mountz focuses on delivering high solutions to ensure customers can always proceed with confidence. We are committed to forging a safer world through precision and accuracy and by innovating every day. Product Quality Standards ISO 9001; ISO 14001; ISO 45001 Arm comply to partly assembled Machinery Directive 2006/42/CE Torque tools go out of calibration with use. Calibrating a torque tool is a fine- calibration of a hand screwdriver ensures accuracy, repeatable tool performance, performance, application, degree of usage, and management objectives. industry for more than 60 years. Engineered in the Silicon Valley and serving the globe, Mountz focuses on delivering high-quality torque products, services, and
Mountz Service Locations
Eastern 19051 Underwood Rd. Eastern Service Center Foley, AL 36535 Phone: (251) 943 Fax: (251) 943 Phone: (251) 943-4125 Fax: (251) 943-4979 Western Service Center 1080 N.11th Street San Jose, CA 95112 Phone: (408) 292 Fax: (408) 292 UK Service Center Pier Copse Courtyard, Milland Lane, Liphook, Hampshire, GU30 7JN, UK Phone: 00 44 1428 7417 Phone: 00 44 1428 741756 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
The Mountz Advantage Products for Industry Experts by Torque Experts We are torque experts. Our tools offer customization requirements.
We are torque experts. Our tools offer customization options, allowing you to tailor them to you options, allowing you to tailor them to your
Experienced Human, Customer Support We take the time to understand your application needs and make re experience. We take the time to understand your application needs and make recommendations based on industry commendations based on industry Tools Built to Last Preventing downtime is critical for success. Durability is at the core of what we do. Our tools are built to last and undergo extensive testing to ensure they meet the highest standards. Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com Mountz offers product implementation support and additional technical support beyond our standard service agreement. Please contact our applications or customer experience teams for additional support. ical for success. Durability is at the core of what we do. Our tools are built to last
Scan for Warranty & Returns Policy
Page 1 Page 2 Page 3 Page 4 Page 5Made with FlippingBook Annual report maker