MSP-SERIES AUTOMATION SC PRESENTERS
SERIES AUTOMATION SCREW
Rev 1 (9/1/2025)
The device is specifically engineered to integrate seamlessly with robotic and automated screw systems. It requires the electric screwdriver to be equipped with a vacuum attachment being dispensed from the screw presenter. systems. It requires the electric screwdriver to be equipped with a vacuum attachment to pick up screws The device is specifically engineered to integrate seamlessly with robotic and automated screw-driving to pick up screws
Power Switch
Lid
Function Adjustments
Plate Adjustment
Turntable
Container Lid Adjustments
Sensor Adjustment
Signal Wires (2 wires) come out from bottom of screw presente from bottom of screw presenter
AC Adapter: Do not use any other AC adapter other than the recommended accessory. not in use, be sure to unplug the AC adapter from the wall outlet during closing hours and if the machine will be left unused for any extended period of time. adapter other than the recommended accessory. When machine is e sure to unplug the AC adapter from the wall outlet during closing hours and if the machine will When machine is
Item # 144782 Model: Power Supply for MSP Screw Presenters (120V Power Supply for MSP Screw Presenters (120V)
Rail: Do not damage or oil the rail.
Signal Wires: Wiring Diagram for signal Wire *Located on the side of the screw presenter switch when screw is Present/Not).
Wiring Diagram for signal Wire *Located on the side of the screw presenter. (Open/close (Open/close
Operational Workstation Usage: Install the screw presenter on a level, stable work station that can support its weight and withstand the operating conditions. If the machine falls down or turns over due to improper installation, injuries or property damage may result. Have the device sent to Mountz service location for servicing. weight and withstand the operating conditions. If the machine falls down or turns over due to improper
Made with FlippingBook Annual report maker