UBURR BLADE REMOVAL UBURR BLADE REMOVAL
Remove the blade: Unlock the screw using an Allen key with a counterclockwise turn of the locking screw. Push the blade by hexagon key through. Pull up the blade from the holder. Remove the blade: Unlock the screw using an Allen key with a counterclockwise turn of the locking screw. Push the blade by hexagon key through. Pull up the blade from the holder. Remove the blade: Unlock the screw using an Allen key with a counterclockwise turn of the locking screw. Push the blade by hexagon key through. Pull up the blade from the holder.
1
1
2 3 1
2 3
2 3
Blade Replacement
LTIMATE
BLADE REMOVAL 1. Remove the blade: Unlock the screw using a 0.05” Allen key with a counterclockwise turn of the locking screw.
1
1
1
THE SERIES
Front and Back Deburring Ød Range of Ø2.5-25mm (0.098-0.984")
2
2. Push the blade by hexagon key through.
2
2
Ød
3 UBURR BLADE INSERTION UBURR BLADE INSERTION UBURR BLADE INSERTION 3 1
Tool Holders Support Pilot Hole Diameters Ød Ranging from Ø8.0-25.0mm (0.315-0.984”)
Insert the blade into the holder slot. Push the blade into the tool pocket. Lock the screw clockwise. Insert the blade into the holder slot. Push the blade into the tool pocket. Lock the screw clockwise. Insert the blade into the holder slot. Push the blade into the tool pocket. Lock the screw clockwise.
Front and Back Deburring Ød Range of Ø2.5-25mm (0.098-0.984")
Through-hole Back Counterbore or Spotfacing
Through-hole Back Countersink or Chamfering
3. Pull up the blade from the holder.
2 3
3 1
s
1 2
Diameters from Ø8.5-57.5mm (0335-2.264”)
Diameters from Ø8.5-46.0mm (0.335-1.811”) Available with Standard 82° and 90° Countersink Inserts 2 3 3
Semi-Standard or Tailor-made Inserts
1
46
46
1
Ceramic Fiber Brushes For Inner-holes, Cross-holes Ød Range of: Ø1-20mm (0.0394-0.787”) For Surfaces Ød Range of Ø6-100mm (0.236-3.937”) Available in 10 Grit Levels from #150 to #6000 2. Push the blade into the tool pocket. Ød BLADE INSERTION 1. Insert the blade into the holder slot.
Ød
Ød
46
1
Front and Back Deburring Ød Range of Ø2.5-25mm (0.098-0.984")
Through-hole Back Counterbore or Spotfacing
Through-hole Back Countersink or Chamfering
2
Diameters from Ø8.5-57.5mm (0335-2.264”)
Diameters from Ø8.5-46.0mm (0.335-1.811”) Available with Standard 82° and 90° Countersink Inserts
Semi-Standard or Tailor-made Inserts
2
Ød
Ød
Ød
Ød
2
ØD α °
3
ØD±0.1mm (0.004") Up to 2.3xØd
3. Lock the screw clockwise.
3
ØD α °
ØD±0.1mm (0.004") Up to 2.3xØd 3
100
t: 020 8400 2020
f: 020 8400 2021
e: sales@lineartools.co.uk
w: www.lineartools.co.uk
4
Made with FlippingBook - Online Brochure Maker