Measuring, Inspection & Gauges
Small Hole Gauges TECHNICAL: • These satin chrome plated gauges provide easy and accurate measurements of holes and slots • Knurled knob at the handle end provides sizes adjustment • Used to measure deep and shallow holes, slots and grooves • Hole size is obtained by measuring over the contact points with a micrometer • Fully hardened measuring tip for long life and accuracy • Meets or exceeds U.S. Federal Specification: GGG-C-95A/26 Jun 1987
PDF 1290 CLICK FOR
Order Code
Metric Range
Imperial Range
Weight Width Height Length Price EACH
Set of 4 - A-D 3-13mm/.125”-.500”
4S-4
£58.00 P
Surface Gauges TECHNICAL: • Hardened and ground base
• Ground vee groove in base for mounting on cylindrical work • Retractable pins provided in the base for work on flat surfaces • Double ended 4mm scriber with hardened points for marking out • Fine adjustment of spindle may be made at any angle above or below the base
Order Code 5035-300
Description/Size
Base Size
Pillar 1 Length Pillar 2 Length Weight Width Height Length Price EACH
Large Base with 2 Pillars
82 x 63 x 27.5 mm
225 mm/ 9 ”
300 mm/ 12 ”
1600 105
113
310
£58.60
P
Please note: Listed weights and dimensions relate to the packaged product/tool. Weight is figured in grams. Width, Height & Length are figured in Millimeters.
125
t: 020 8400 2020
f: 020 8400 2021
e: sales@lineartools.co.uk
w: www.lineartools.co.uk
Made with FlippingBook - Online Brochure Maker