Linear Tools Catalogue 2020

Measuring, Inspection & Gauges

TECHNICAL: • These gauges provide easy and accurate measurements of holes and slots • Two plungers under equal and constant spring pressure can be locked between the walls of a slot or across the diameter of a hole. • Final size is determined by measuring across the points of the plungers with a micrometer or caliper • Plunger tips are hardened and ground • Knurled knob at the top of handle is used for locking the plungers • Gauges have a satin chrome finish • Measuring Tips are titanium coated for wear resistance, with a radiused end • Meets or exceeds U.S. Federal Specification: GGG-C-95A/26 Jun 1987 TiNCoatedTelescopic HoleGauges

PDF 1289 CLICK FOR

Order Code

Description/Size

Weight Width Height Length Price EACH

Set of 5 - A-E 12.5 -150mm / 1/2-6” Set of 6 - AA-E 8-150mm / 5/16-6”

460 540

210 210

20 20

210 210

3S-5TN 3S-6TN

£204.00 P £231.40 P

SmallHole Gauges TECHNICAL: • These satin chrome plated gauges provide easy and accurate measurements of holes and slots • Knurled knob at the handle end provides sizes adjustment • Used to measure deep and shallow holes, slots and grooves • Hole size is obtained by measuring over the contact points with a micrometer • Fully hardened measuring tip for long life and accuracy • Meets or exceeds U.S. Federal Specification: GGG-C-95A/26 Jun 1987

PDF 1290 CLICK FOR

Order Code

Metric Range

Imperial Range

Weight Width Height Length Price EACH

3-5mm

0.125-0.200” 0.200-0.300” 0.300-0.400” 0.400-0.500”

9

5 5

5 5

90

4S-A 4S-B 4S-C 4S-D 4S-4

£24.50 P £26.40 P £28.40 P £30.60 P £88.00 P

5-7.5mm 7.5-10mm 10-13mm

10 24 26

100 110 110

10 10

10 10

Set of 4 - A-D 3-13mm/.125”-.500”

Surface Gauges TECHNICAL: • Hardened and ground base

• Ground vee groove in base for mounting on cylindrical work • Retractable pins provided in the base for work on flat surfaces • Double ended 4mm scriber with hardened points for marking out • Fine adjustment of spindle may be made at any angle above or below the base • US Fedral Specification: GGG-G-17C/16 Jun 1987

Order Code 5033-007 5033-009 5033-012

Description/Size

Base Size

Pillar 1 Length Pillar 2 Length Weight Width Height Length Price EACH

100 mm/ 4 ” 225 mm/ 9 ” 225 mm/ 9 ”

175 mm/ 7 ”

514

80

55

237 310 310

Small Base with 2 Pillars

56 x 40 x 18

£81.20 £88.10 £92.90

P P P

N/A

1500 105 1600 105

113 113

Large Base with Single Pillar 82 x 63 x 27.5 mm

300 mm/ 12 ”

Large Base with 2 Pillars

82 x 63 x 27.5 mm

Please note: Listed weights and dimensions relate to the packaged product/tool. Weight is figured in grams. Width, Height & Length are figured in Millimeters.

Email sales@lineartools.co.uk Website www.lineartools.co.uk

131

Made with FlippingBook - Online Brochure Maker