Machine Tool Accessories
Extended Revolving Centres
Pipe (Bullnose) Revolving Centres
PDF 1044 CLICK FOR
PDF 1044 CLICK FOR
APPLICATION: Revolving centers are constructed so that the 60°center runs in its own bearings and is used at the non-driven or tailstock end of a machine. It allows higher turning speeds without the need for separate lubrication, and also greater clamping pressures. CNC lathes use this type of center almost exclusively and they can be used for general machining operations as well. TECHNICAL: • Manufactured from high quality tool steel • Hardened & ground • 60 degree point • Fully sealed bearings
APPLICATION: A pipe center has a larger diameter at the 60°taper end. This allows the center to be used in the bore of a pipe (or similar workpiece). While a pipe center ensures the workpiece remains concentric, its main advantage is that it supports the workpiece securely. TECHNICAL: • Manufactured from high quality tool steel • Hardened & tempered • Precision ground externally • Point Angle: 60 degrees • Minimum point dia: 30mm
Specification Order Code
Specification Order Code
Morse Taper
Point Length
Max Speed
Max Point Dia
Morse Taper
Point Length
Max Speed
Max Point Dia
MT 2 MT 3
32 42
5000 4000
17.5 24.5
MT 3
75
4500
81.5
RCE-02 RCE-03
RCP-03
Extended Revolving Centres Order Code Morse Taper
Extended Revolving Centres Order Code Morse Taper
Wg g
W mm
H mm
L mm
Price EACH
Wg g
W mm
H mm
L mm
Price EACH
MT 2 MT 3
678 50 50 160 £88.80
MT 3
2150 106 90 195 £166.80 P
RCE-02 RCE-03
P
RCP-03
1178 87 85 230 £102.00 P
Please note: Listed weights and dimensions relate to the packaged product/tool. Weight is figured in grams. Width, Height & Length are figured in Millimeters.
51
t: 020 8400 2020
f: 020 8400 2021
e: sales@lineartools.co.uk
w: www.lineartools.co.uk
Made with FlippingBook - Online Brochure Maker