SPECIFICATION CATALOG
SPECIFICATION CATALOG 2024 - 2025
THE SELECT SERIES — PRODUCT SUMMARY EXTENDED LEAD TIME
Hickory wood species and some items noted within the specification catalog. See the Lead Time Chart for more details.
END PANEL CONSTRUCTION NOTE
Standard Select Series is constructed of furniture board end panels with non-matching wood grain laminate. Plywood Cabinet Ends and All Plywood Construction receive unfinished plywood end panels. Please remember to specify finished ends for all exposed ends*. See end panel options on page Select –1– 58. *Some cabinets are standard with matching finished or flush cabinet ends; refer to the individual cabinet specifications in the specification catalog.
RUSH PROGRAM GUIDELINES
As stated in the Wellborn Cabinet, Inc. Dealer Handbook, the Rush Program enables customers to expedite a limited number of cabinets and accessories on a weekly basis. Total RUSH for All Brands, All Series = Five (5) Cabinets & Five (5) accessories per week. (Please refer to your Dealer Handbook for detailed program information.) 5 day, 9 day and no RUSH Item availability is notated in the price catalog. Items available on the Rush Program are subject to change at Wellborn Cabinet, Inc.’s discretion.
INSTALLATION NOTE
Any wall cabinets greater than 36" wide are not recommended as stand alone cabinets without additional reinforcements above and beyond Wellborn's installation manual guidelines. We also recommend that any stand alone cabinet, regardless of width, be reinforced with angle brackets to help support the weight that is added to cabinet interior from accessories. Wellborn Cabinet, Inc. will not warranty any cabinets that fall as a result of standing alone. It is the dealer's responsibility to design cabinetry that is not single displayed on a wall. Dealer will be obligated to pay the cost of damages if dealer designs kitchen with single cabinets. Wellborn Cabinet, Inc. meets or exceeds KCMA weight requirements.
ADDITIONAL DESIGN AND INSTALLATION INSTRUCTIONS FOR WALL CABINETS DEEPER THAN 12”
Any wall cabinet greater than 12” in depth requires additional support. This can be accomplished with same depth adjacent wall or tall cabinets, refrigerator end panels, a side wall, or supported from below. Failure to provide additional support could result in injury or damage from a collapsing or falling cabinet.
ORDERING TIPS
• Must specify L or R on all single door cabinets. • All door styles have 6-way adjustable concealed self-closing hinges.
SELECT PRICING STRUCTURE Door Styles:
Wellborn’s Select Series pricing system is based on column pricing using Maple or MDF as the base list price dependent on door style. Each door style is assigned to a pricing column at its base list price, and depending on the wood species selected, an addition or deduction may be taken. Maple, Hickory, or MDF have no species upcharges. Accessory Items: The new pricing system structure will also apply to all accessory items such as bookcases, hoods, mouldings, fillers, etc., where an item is built in any of the multiple species listed below. For the majority of the time, MDF will substitute for Maple, but if not, it will also not receive an upcharge.
Please refer to the chart below for species charges. For detailed information on how to price, please see the Select Pricing Guidelines.
Species
Upcharge
Species
Upcharge
Species
Upcharge
Cherry
+5%
Maple
0% 0%
Oak
-5%
MDF
Hickory
0%
Select–1–4
SELECT PRICE REFERENCE GUIDE Please use this page to reference pricing in the Wellborn Select Series. This guide lists door styles and species that are available in each price column.
1
2
3
4
5
Arlington Square MPL Hancock MDF
Harvest Square MPL Prarie MPL/HKY
Bedford Square MPL/HKY Concord MPL
Alto MDF
Bishop MDF Camden Square MDF Harmony MPL Millbrook Square MPL Preston MPL Urban MPL
Franklin MPL Preston MDF
Select–1–5
SELECT PRICE COLUMN REFERENCE GUIDE
Please use this page to line up with pricing columns in the Wellborn Select Series Price Catalog. This guide lists door styles and species that are available in each price column.
Bishop MDF Camden Sq. MDF Harmony MPL Millbrook Sq. MPL Preston MPL Urban MPL
Alto MDF Franklin MPL Preston MDF
Arlington Sq. MPL Hancock MDF
Harvest Sq. MPL Prairie MPL/HKY
Bedford Sq. MPL/HKY Concord MPL
Rush
Cubic Feet
Avg. Weight
Item
1
2
3
4
5 APC
Extended LT
Standard LT
SELECT PRICING GUIDELINES
Wellborn offers a simplified price structure. Please refer to the detailed pricing procedure below to determine your new list price. See the Modifications for pricing details.
Steps
Procedures
Examples
Amount $1,757.00
1. List Price Start with cabinet list price.
Find Cabinet List Price.
Select Species and calculate percentage up or down based on Step 1.
Calculate Upcharge for cherry (5%) - multiply Step 1 by 5%. ($1,757 x 5% = $87.85) Based on amount calculated in Step 2, round either up or down.
2. Species Charge
$ 87.85
0.15
3. Rounding Round Step 2 to the nearest whole dollar.
$
4. Subtotal
Add steps 1-3.
Add Steps 1-3 for new List Price Multiply Step 4 by finish upcharge. ($1,845 x 15% = $276.75)
$1,845.00
Calculate finish upcharge based on total from Step 3. Do not round. Calculate percent based Modifications. If you have multiple Modifications, add the percentages together and calculate based on Step 3 subtotal. Do not round. Calculate List Price based Modifications. If you have multiple Modifications, add the list prices together. Do not round. Total amounts from Steps 4-7. This is your Total List Price including finish upcharges and Modifications. Do not round.
5. Finish
$ 276.75
Charge
If Reduced Depth (23%) and Peninsula (60%) Modifications are selected, add percentages together and then multiply total by Step 4 subtotal. ($1,845 x 83% = $1,531.35) If Recessed Toe Kick ($96) and Matching End Panel Installed is chosen, add list prices together. ($96 + $519 = $615) Add Steps 4-7 together for Total List Price. ($1,845 + $276.75 + $1,531.35 + $615 = $4,268.10)
6. MOD-1
$1,531.35
7. MOD-2
$ 615.00
8. Total
$4,268.10
Finish up -charges only apply to the cabinet list price. Finish up-charges are not applied to any Modifications.
MOD-1 Modifications (Percentage) APC – All Plywood Construction BO – Box Only
MOD-1 (continued) Modifications (Percentage) ID – Increased Depth P – Peninsula PCE – Plywood Cabinet Ends RD – Reduced Depth VTDB – Void Top Drawer Box VTK – Void Toe Kick
FFO – Face Frame Only FH – Full Height Doors FI/FIFD – Finished Interior/Finished Interior Finished Door FIDDF/FIDDFTOP/FIDDFBTM – Finished Interior Decorative Door Frames FIM – Finished Interior Microwave FIMD – Finished Interior Mullion Door FO – Front Only
MOD-2 Modifications (List Price) 4FIN – Feet Installed AC – Appliance Cutout ADR – Applied Door
MOD–2 (continued) Modifications (List Price) PPLCIN – Pot, Pan and Lid Caddy Installed PWD – Plywood Drawer Upgrade RF – Removable Front RTK – Recessed Toe Kick SBSKIN – Sink Base Storage Kit Installed SBSKTIN – Sink Base Storage Kit with Trays Installed SBSSIN – Sink Base Storage Shelf Installed SCH – Smooth Close Hinge SDF – Slab Drawer Front SRDIIN – Spice Rack Drawer Inset Installed
BBDCIN – Bread Box Drawer Cover Installed CBDKIN – Cutting Board Drawer Kit Installed CBKDKIN – Cutting Board and Knife Drawer Kit Installed CDF – Classic Drawer Front CTKIN/CTDKIN/CDKIN/TCTDIN – Cutlery Tray Kits/Divider Kits/ Drawer Kits Installed
SSSCIN – Sliding Shelves with Soft Close Installed ST32IN – 32” Round Wooden Spin Tray Installed STS/SBS – Square Top and/or Bottom Shelf for All Whatnot Shelves SWIN/DWIN – Wastebasket Kit Installed SWTDIN – Sliding Wire Tray Divider Installed TDIN – Tray Divider Installed TKA – Toe Kick Added TKU – Toe Kick Unattached TOTIN – Tilt Out Tray Installed TTOIN – Touch To Open Installed UTDIN – U-Shaped Tray Divider Installed Valance Options – S, AV, CV, SFV VSPOKITIN – Vanity Sink Pullout Organizer Kit Installed VSWBPKITIN – Vanity Sink Wastebasket Pullout Kit Installed WBR – Wide Bottom Rail WCM – Without Center Mullion WDSC – Wood Drawer with Full Extension Undermount Drawer Slides Featuring Soft Close
DDFIN – Decorative Door Frames Installed DIBIN – Drawer Ironing Board Installed DSKIN – Door Shelf Kit Installed DTAIN/DTGIN – Drip Tray Almond/Gray Installed DWRIN – Drawer Installed ES – Extended Stile FCE – Flush Cabinet End FDBS – Full Depth Base Shelf HGDF – Horizontal Grain Drawer Front
KBIIN – Knife Block Insert Installed KDWRKIN – Knife Drawer Kit Installed MDIN – Mullion Doors Installed MEPIN – Matching End Panels Installed MFE – Matching Finished End MTLDINSG/MTLDINRG – Metal Doors Installed Satin Glass/Reeded Glass OTDIN – Oven Tray Divider Installed OTDSIN - Oven Tray Dividers & Shelf Combo Installed
WDTDIN – Wood Tray Divider Installed WSRIN – Wooden Spice Rack Installed WTD9IN/WTD12IN – Wire Tray Divider Installed
Note: Due to construction options and various packaging requirements, weights shown in this catalog may vary from actual weight.
Select–1–7
STANDARD DOOR HINGE INFORMATION
When ordering, specify either W1230 L for left hinge or W1230 R for right hinge. Direct Connect automatically defaults hinging to left. You must remember to change it if you need the door hinged right. All single door cabinets must be specified left or right hinge. These cabinets will have “L/R” immediately following their nomenclature throughout the catalog. Face cabinet when specifying left or right. For example: W1230 L/R
W1230 R Right Hinge
B12 L Left Hinge
WELLBORN SYMBOLS
L/R
All single door cabinets must be specified left (L) or right (R) hinge.
The “MOD” symbol denotes cabinets are available with accessory kits and decorative/mullion doors installed at the factory.
The “Design Ideas” symbol references a design idea that can be found in the Wellborn Specification Catalog.
+
The ‘+’ symbol in APC price column refers to option availability and the upcharge for the option.
SUBSTITUTIONS
To allow our customers more design flexibility, substitutions are made for species and finishes and are noted in the specification catalog where applicable. Please note that these substitutions will complement your designs but will not be an exact match. Common substitutions in our catalogs are listed below: Oak is substituted for Hickory. For MDF door styles, item is finshed hardwood.
ABBREVIATIONS
TOL FOL
Traditional overlay door styles Full overlay door styles
DETERMINING ORDERING CODES
To determine ordering codes, add the desired series code, door style code and species code to the preferred finish code. For example: Prairie Classic Drawer Front Maple Caramel Java Series Door Drawer Species Finish Glaze Header Style Front Option Code SEL + PRA + CDF + MPL + CML + JAV = SEL PRA CDF MPL CML JAV (Select Series)
Select–1–8
FRAME OPENING DETAILS
Select–1–9
FRAME OPENING DETAILS (continued)
Select–1–10
THE SELECT SERIES — STANDARD CONSTRUCTION
The Select Series has a machine sanded finishing process and does not include the detailed hand sanding technique featured in the Premier Series. Therefore, Wellborn Cabinet, Inc. does not recommend designs combining these series. Wall
11 ⁄ 16 ” x 3½” Wood grain laminated fiberboard hanging rails ½” Wood grain laminated furniture board top
¾” x 1¾” Kiln-dried solid wood face frames; mortised and tenoned, glued and stapled ½” Natural maple wood grain laminated furniture board end panels finished on top and bottom edges * Hanging rail dadoed to receive cabinet floor Interior is wood grain laminate **
1 ⁄ 8 ” Wood grain printed MDF back
¾” Wood grain laminated furniture board adjustable shelves with edge banding; WellLock Shelf Clips ® ½” Wood grain laminated furniture board bottom ¾” x 3½” Solid wood center stile where applicable ***
Doors have 6-way adjustable WellLine ® concealed hinges
*** Without center mullion is standard on cabinets 30” -36” wide
*
For end panel options, see page Select–1–58. ** For Paints and Paints with Glazes, the interior and exterior will be natural maple wood grain laminate.
½” x 3" I-Beam furniture board support dadoed into front, back and side ¾” Wood grain laminated furniture board adjustable half depth shelves with edge banding; dual locking WellLock Shelf Clips ® ½” Wood grain laminated furniture board bottom (solid wood braces on 36” wide and larger cabinets) ¾” x 1¾” Kiln-dried solid wood face frames; mortised and tenoned, glued and stapled Hanging rail dadoed to receive cabinet floor Interior is wood grain laminate **
Base
¾” x 3½” Solid wood center stile where applicable *** 11 ⁄ 16 ” x 3½” Wood grain laminated fiberboard hanging rails
1 ⁄ 8 ” Wood grain printed MDF back
½” Natural maple wood grain laminated furniture board end panels * 4½”H x 3 3 ⁄ 8 ”D Toe kick cut-out, ½” unfinished furniture board toe kick extends to cabinet floor for captive construction
*** Without center mullion is standard on cabinets 30” -36” wide
*
For end panel options, see page Select–1–58. ** For Paints and Paints with Glazes, the interior and exterior will be natural maple wood grain laminate.
Drawer
D rawer U pgrade O ptions
¾” Wood grain laminated furniture board drawer sides, tenoned to accept ½” sub-front and back Epoxy coated captive self-closing drawer slides (drawer has a 75 lb. weight capacity) 1 ⁄ 8 ” Wood grain printed hard board drawer bottom
P lywood D rawer U pgrade
S olid W ood D rawer F ull E xtension D rawer S lides 8 ” Solid hardwood drawer box in natural finish • Dovetail construction • Full extension undermount drawer slides • Soft close function • Keeps items from shifting • 5 ⁄
• 5 ⁄
8 ” Plywood dovetail drawer in natural finish undermount, full extension, soft close drawer slides
• Smooth,
• Smooth, quiet drawer • Prevents rebounding
• Smooth quiet drawer
¾” Drawer front
See Select –1–57 for ordering codes
Select–1–11
THE SELECT SERIES — SMART CHECKS OPTIONS
Drawer Options: Standard Drawer Furniture Board Drawer
Wood Drawer With Full Extension Drawer Slides Upgrade Option Solid Wood Drawer with Full Extension Drawer Slides featuring Soft Close (WDSC) • 5 ⁄ 8 ” Solid hardwood drawer box in natural finish • Dovetail construction • Full extension, undermount, soft close drawer slides • Keeps items from shifting
• 3 ⁄ 4 ” Wood grain laminated furniture board drawer • Epoxy coated, self-closing, side mount drawer slides
• Smooth, quiet drawer • Prevents rebounding • Specify WDSC order code
Plywood Drawer Upgrade
• 5 ⁄ 8 ” Plywood dovetail drawer in natural finish • Smooth, undermount, full extension, soft close drawer slides
• Smooth, quiet drawer • Specify PWD to order
Hinge Options:
Standard Hinge
• 6-way adjustable concealed hinge • Soft Close • See page Select–1–57 for details and ordering codes Smooth Close Hinge Option
• 6-way adjustable concealed hinge
End Panel Options: Standard End Panels ½” Furniture Board End Panels:
Finishes with Natural Ends • Shipped standard with natural maple wood grain laminate • Does not match cabinet front • All exposed cabinet ends require an end application
Factory Installed Options:
Matching End Panel • See page Select–1–78 for details and ordering codes
Matching Finished End • Specify MFE for one or both ends • See Select–1–58 for details and ordering codes
Flush Cabinet End • Specify FCE for one or both ends • Yields a ¾” flush, finished plywood cabinet end • See Select–1–58 for details and ordering codes
Applied Door Option • See page Select–1–64 for details and ordering codes
Field Installed Options:
Applied Finished Door • Skin the End Panel • Add appropriate size door
Matching End Panel
Finished Skin
Bead Board Panels
Select–1–12
THE SELECT SERIES — STANDARD CONSTRUCTION SPECIFICATIONS
F inish Cabinet components are machine sanded to prepare the surface for staining. Wellborn hand rubs the stain to enhance the natural wood grain. Three coats of finish, including two coats of high moisture resistant sealers and one top coat of high molecular weight synthetic catalyzed varnish, result in a durable finish. Natural finishes receive two coats of sealer and one top coat. The Select Series has a machine sanded finishing process and does not include the detailed hand sanding technique featured in the Premier Series. The following door styles are shared between Select and Premier: Alto, Bishop and Prairie. These will have the Select Series quality sanding and finishing even when ordered in the Premier Series. Wellborn Cabinet, Inc. does not recommend designs combining these series. F ace F rames 1¾” x ¾” Thick kiln-dried solid wood stile and rail members. The center stiles are ¾” x 3½” solid wood. On all blind corner base and blind corner wall cabinets, the center stiles are ¾” x 6½” solid wood. All face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints. E nd P anels ½” Thick industrial grade furniture board with natural maple wood grain laminate exterior resistant to household chemicals. Interior is wood grain laminate. The top and bottom edges of wall cabinet end panels are banded with wood grain edge banding. End panels are machined to accept tops, bottoms and back panels. W all C abinet T ops and B ottoms & B ase C abinet B ottoms ½” Thick industrial grade furniture board. These components are laminated with wood grain laminate. A dado joint, glue and staples are used to attach the top and bottom into face frames, end panels and hanging rails.
B acks
All backs are 1 ⁄ 16 ” x 3½” laminated fiberboard hanging rails at the top and bottom. Wall cabinet backs are recessed and stapled into end panels, hanging rails and shelves. Base cabinet backs are attached in the same manner; the top and bottom of the base cabinet have 11 ⁄ 16 ” x 3½” laminated fiberboard hanging rails securing the back to the top of the end panel. 8 ” thick wood grain MDF printed on the interior side. Wall cabinet backs are reinforced with 11 ⁄
S helves Wall Cabinets — Adjustable Shelves
All wall cabinet shelves are adjustable and made of ¾” thick industrial grade furniture board. The shelves are laminated with a wood grain laminate which is resistant to water and household chemicals. The front edge of the shelf is banded with wood grain edge banding. The cabinet sides are drilled for shelf supports which are adjustable at 2½” increments. Base Cabinets — Adjustable Shelves All base cabinets have fully adjustable ¾ ” thick industrial grade furniture board shelves. The shelves are 10 9 ⁄ 16 ” deep and laminated with a wood grain laminate. The front edge is banded with a wood grain or white edge banding. B ase T oe B oard The toe kick for base, vanity, utility and oven cabinets is ½” x 4½”— industrial grade furniture board. Toe kicks are unfinished and have rodent proof captive construction. The inner box construction includes ¾” wood grain furniture board drawer sides, and ½” sub-front and back. All backs and sub-fronts are tenoned into the sides, glued and stapled. The drawer box is screwed to the drawer front with four screws and is a full depth drawer. The drawer has a 75 lb. weight capacity. Bottoms 1 ⁄ 8 ” Wood grain printed hardboard drawer bottoms dadoed to accept both sides, glued and stapled. D rawer S lides Drawers have epoxy coated side mount captive slides that provide smooth, easy operation. The slide has positive stop opening and self-closing features. Drawer slides fit into a bracket mounted to the hanging rail. The bracket allows horizontal drawer adjustability. D rawer — I nner B ox C onstruction Sides, Sub-Front and Back
6–W ay A djustable C oncealed H inges Hinges are 6-way adjustable, chrome finished and self-closing with a concealed hinge design.
Select–1–13
Plywood Cabinet Ends
All Plywood Construction
Standard Construction
Standard Construction
Options
Select Quick Reference Construction Chart
Feature Description
Select PCE
APC PWD WDSC MFE FCE
Premier
¾” Laminated furniture board sides, tenoned to accept ½ ” sub-front & back
●
Drawer Box
5 ⁄ 8 ” Plywood dovetail drawer sides, sub-front & back
5 ⁄ 8 ” Solid hardwood drawer sides, sub-front & back with dovetail construction
●
1 ⁄ 8 ” Printed MDF
●
Drawer Bottom
3 ⁄ 16 ” Laminated plywood bottoms
●
Epoxy coated captive self-closing slides, bracket allows horizontal adjustment Full extension drawer slides featuring soft close (PWD & WDSC) ¾” Laminated furniture board adjustable shelves, front edge banded ¾” Plywood adjustable shelves laminated and front edge banded
●
Drawer Slides
●
●
●
Shelves
½” Laminated furniture board
●
●
Tops & Bottoms*
½ ” Plywood (laminated with wood grain laminate)
Wood raised panel/veneer raised panel/recessed panel/slab melamine
Doors
●
●
½” Laminated furniture board
●
½” Thick plywood unfinished exterior & wood grain laminate interior ½” Thick plywood, matching finished exterior with wood grain laminate interior ¾” Thick plywood, matching finished exterior with wood grain laminate interior ½” x 4½”H Unfinished furniture board toe kick with captive construction ½” x 4½”H Unfinished plywood toe kick with captive construction ¾” x 1¾” Solid wood Center stiles are ¾” x 3½” Corner wall and base center stiles are ¾” x 6½”
End Panels
●
●
Toe Kick
Face Frames
●
●
1 ⁄ 8 ” Printed MDF
●
Backs
3 ⁄ 16 ” Plywood laminated on interior
½” x 3” I-Beam furniture board supports dadoed into front, back and side ½” x 3” I-Beam plywood supports dadoed into front, back and side
●
●
I-Beams
6-way adjustable concealed
●
Hinges
6-way adjustable concealed with Smooth Close
●
PWD WDSC MFE FCE
* Refers to wall cabinet tops only. • Standard Option
= = = =
Plywood Drawer Upgrade Wood Dovetail Drawer with Full Extension Soft Close Slides Matching Finished End Flush Cabinet End
Select–1–14
THE SELECT SERIES — INSTALLATION RECOMMENDATIONS
Filler Requirements for Full Overlay Cabinets installed adjacent to “Pulled” or Increased Depth cabinets. * Add 1/4" to the Filler width if the * Filler Width Required 4 1/8
“Adjacent Cabinet” has standard end panels with the 1/4" scribe on the frame. Cabinets with flush ends would not require the additional 1/4". A minimum 1/4" Filler is also required on Drawer Base Cabinets Installed in this situation to allow the Drawer Front to clear the 1/4" Frame Scribe when the drawer is pulled out.
3 1/16
1 15/16 7/8
Installation Recommendations for Applied Moulding Doors Only
3
6
Cabinet Frame
9
Adjacent cabinet “pull” or Increased Depth.
12
Cabinet Door
Hinge Restrictor Clips can be found in Hardware Section
THE SELECT SERIES — REVEAL NOTICE
All Base, Vanity and Desk cabinets have a 3 /
16 ” reveal for FOL door styles and 1 1 /
4 ” reveal for TOL door styles at top.
Select–1–15
NOTES
Select–1–16
THE SELECT SERIES — WOOD DOOR STYLE DESCRIPTIONS
Traditional Overlay Concealed Hinge Door Styles: Door styles with a concealed hinge and a ½” side, top and bottom door overlay. Full Overlay Concealed Hinge Door Styles: The top drawer fronts for bases, desks, vanity bases, base height vanities and vanity linen cabinets are 6 1 ⁄ 8 ”. Base full height doors are 29 5 ⁄ 8 ”, desks are 23 5 ⁄ 8 ”, and vanity sink cabinets are 26 5 ⁄ 8 ”. The reveal dimension between the top of the drawer front to the top of the face frame is 3 ⁄ 16 ”. Square Door Styles: Represents all Wellborn door styles with square wall and base door designs. Miter Door Styles: Represents all Wellborn door styles with mitered door designs. A rlington S quare Traditional overlay 3 ⁄ 16 ” veneer square recessed center panel surrounded by 2¼” solid wood stiles and rails. The cope and tenon joints are bonded with glue and pinned from the back with a 5 ⁄ 8 ” steel pin which is concealed with wood filler. The outside perimeter of the door and solid wood drawer front have an attractive profiled edge with a back bevel creating an integral finger pull. B edford S quare Full overlay solid wood raised center panel door and drawer front with a decorative edge profile. The cope and tenon joints are bonded with glue and pinned from the back with a 5 ⁄ 8 ” steel pin which is concealed with a wood filler. C oncord Full overlay mitered construction door and drawer front with 3 ⁄ 8 ” veneer raised center panel surrounded by 2¼” solid wood stiles and rails. The door and drawer front feature a beaded outside perimeter and an attractive multi-step profile. F ranklin Traditional overlay veneer square recessed center panel surrounded by 2¼” solid wood stiles and rails. The cope and tenon joints are bonded with glue and pinned from the back with a 5 / 8 ” steel pin which is concealed with wood filler. The outside perimeter of the door and solid wood drawer have a square edge. H armony Full overlay mitered construction door and drawer front with 3 ⁄ 16 ” veneer recessed center panel surrounded by 2¼” solid wood stiles and rails. The door and drawer front feature a beaded outside perimeter and an attractive multi-step profile. H arvest S quare Traditional overlay veneer square raised panel (except Cherry which is solid) surrounded by 2¼” solid wood stiles and rails. The cope and tenon joints are bonded with glue and pinned from the back with a 5 ⁄ 8 ” steel pin which is concealed with wood filler. The outside perimeter of the door and solid wood drawer front have an attractive profiled edge with a back bevel creating an integral finger pull. M illbrook S quare Full overlay cope and tenon construction door with 3 ⁄ 16 ” veneer square recessed center panel surrounded by 2 9 ⁄ 16 ” stiles and rails. Drawer fronts are a one piece design. The outside perimeter of the door and drawer front has a step edge profile. P rairie Full overlay veneer square recessed center panel surrounded by 2 9 ⁄ 16 ” solid wood stiles and rails. The cope and tenon joints are bonded with glue and pinned from the back with a 5 ⁄ 8 ” steel pin which is concealed with wood filler. The outside perimeter of the door and solid wood drawer front have a square edge. P reston Full overlay cope and tenon construction door with 3 ⁄ 16 ” veneer square recessed center panel surrounded by 2 9 ⁄ 16 ” stiles and rails. Drawer fronts are a one piece design. The outside perimeter of the door and drawer front has a step edge profile. U rban Full overlay veneer square edge slab door and drawers with edge banding.
Select–1–17
THE SELECT SERIES — WOOD DOOR STYLE PROGRAM
Classic Drawer Front
Slab Drawer Front
Cherry
Maple
Oak
Hickory
Price Column
Ordering
Door Name
Code Overlay
SDF
CDF
CHY +5% +5%
MPL
OAK -5% -5%
HKY
Arlington Square Bedford Square
1 5 5 2 3 4 3 4 3 3
ARS BFS
TOL FOL
s
●
s
n
●
●
Concord Franklin Harmony
CRD FOL FKN TOL
q
s
●
-5%
s
n
●
+5% +5% +5% +5%
HMY HVS MBS PRA
FOL TOL FOL FOL
q
s
●
-5% -5% -5% -5% -5%
Harvest Square Millbrook Square
s
●
s
n
●
Prairie
s
n
●
●
Preston Urban
PSN FOL UBN FOL
● v
s
n
+5%
HGDF n
s
●
All finishes for a species are available on all door styles in that species unless noted. For example, all cherry finishes are available on all cherry door styles. v Order MDF species for paints and paints with glazes. Maple available in stains and stains with glazes only. Urban only available in Stains for its available wood species. n Classic Drawer Front Option — CDF available as an option on these door styles. Add a charge of $80 List for each drawer and blank front. q Slab Drawer Front Option — SDF available as an option on these door styles at no charge. s Standard drawer front configuration HGDF n Horizontal Grain Drawer Front — HGDF available as an option on this door style. Add a charge of $80 List for each drawer and blank front. Determining Series Ordering Codes: To determine series ordering code, add the desired series code, door style code and species code to the preferred finish code. For example: Series Door Style Drawer Species Finish Glaze Series Ordering Code Code Code Front Code Code Option SEL + PRA + CDF + CHY + LGT + = SEL PRA CDF CHY LGT(Select Series) SEL + MBS + + MPL + HON + JAV = SEL MBS MPL HON JAV (Select Series) Important Installation Notice: 5-piece drawer fronts attached to plywood dovetail or wood dovetail drawer boxes will have additional bumpers placed on the “figure 8” drawer front attachment brackets for added protection during shipping. These bumpers should be removed after cabinet installation. Doors made with solid wood stiles and rails with plywood veneer center panels will vary in finish from the stiles and rails to the center panel due to the difference in materials. This is not considered a defect and is not covered under warranty. Maple painted doors, except Concord, will have MDF center panels.
Refer to Lead Time Chart for Door Style, Finish and Species Lead Times.
Species
Upcharge
Species
Upcharge
Cherry
+5% -5%
Maple
0% 0%
Oak
Hickory
Select–1–18
THE SELECT SERIES — WOOD DOOR FINISH PROGRAM
Stains
Species
Stains
Ordering Codes
Cherry
Maple
Oak
Hickory
Ash
ASH BDW CML CAS COF DRK DFT ESP LGT MED NAT NFL PRM RRK SBL SEA UNF
●
●
Boardwalk Caramel
●
●
●
●
●
●
●
Castle Coffee
●
●
●
●
●
●
●
Dark Drift
●
●
●
●
●
●
●
Espresso
5%
5%
5%
5%
Light
●
●
●
●
Medium Natural Nightfall
●
●
●
●
●
●
●
●
●
●
●
Peppermill River Rock
●
●
●
●
●
●
●
●
Sable Sienna
●
●
●
●
●
●
●
●
Unfinished
●
●
●
●
Stains with Glazes
Species
Stains with Glazes
Ordering Codes
Cherry
Maple
Oak
Hickory
Caramel Java Drift Slate Honey Java Light Java Natural Java
CML JAV DFT SLT HON JAV LGT JAV NAT JAV NAT SLT NMG JAV SBL CHL SEA CHL
12% 12%
12% 12% 12% 12% 12% 12% 15% 15%
12% 12% 12% 12% 12% 12% 15% 15%
12% 12% 12% 12% 12% 12% 15% 15%
12% 12% 12% 15% 15%
Natural Slate Nutmeg Java Sable Charcoal Sienna Charcoal
Paints
Species
Paints
Ordering Codes
Cherry
Maple
Oak 15% 15% 15% 15% 15% 15% 15% 15% 15% Oak 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15%
Hickory
Alabaster
ABT BLU BWT CPE DOV GLR GYM ONX DIV PBL WSP WLO
15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15% 15%
Bleu
Bright White
Cape
Divinity
Dove
Glacier
Gray Mist
Onyx
Pebble Whisper Willow
Paints with Glazes
Species
Paints with Glazes
Ordering Codes
Cherry
Maple
Hickory
Bright White Java
BWT JAV DIV JAV DOV JAV DOV SLT GLR JAV GYM GTE GYM JAV PBL JAV WLO SLT
15% 15% 15% 15% 15% 15% 15% 15% 15%
Divinity Java Dove Java Dove Slate Glacier Java
Gray Mist Granite Gray Mist Java
Pebble Java Willow Slate
Standard Price (no up-charge)
●
All finishes will have natural maple wood grain laminate end panels (does not match cabinet front). Please refer to Smart Checks for available options on exposed ends. For example, order a finished skin to field install or Matching Finished End. The Select Series has a machine sanded finishing process and does not include the detailed hand sanding technique featured in the Premier Series. The following door styles are shared between Select and Premier: Alto, Bishop, and Prairie. These will have the Select Series quality sanding and finishing even when ordered in the Premier Series. Therefore, Wellborn Cabinet, Inc. does not recommend designs combining these series. Any claims arising from or related to cabinet finish matching in such blended or mixed designs is specifically and expressly not covered under any warranty provision.
Select–1–19
THE SELECT SERIES — FINISH DESCRIPTIONS
Stains with a Glaze Caramel Java: A warm medium brown stain with a dark brown Java glaze Drift Slate: A warm transparent gray stain with a gray Slate glaze Honey Java: A warm natural stain with a dark brown Java glaze Light Java: A warm light stain with a dark brown Java glaze Natural Java: A warm natural stain with a dark brown Java glaze Natural Slate: A warm natural stain with a gray Slate glaze Nutmeg Java: A warm medium stain with a dark brown Java glaze Sable Charcoal: A warm brown stain with a black Charcoal glaze Sienna Charcoal: A warm dark brown stain with a black Charcoal glaze Paints with a Glaze 15% Bright White Java: A warm bright white painted finish with a dark brown Java glaze Divinity Java: A warm off-white paint with a dark brown Java glaze Dove Java: A warm light gray painted finish with a dark brown Java glaze Dove Slate: A warm light gray painted finish with a gray Slate glaze Glacier Java: A warm white paint with a dark brown Java glaze Gray Mist Granite: A warm light toned gray painted finish with a gray Granite glaze Gray Mist Java: A warm light toned warm gray painted finish with a dark brown Java glaze Pebble Java: A warm taupe painted finish with a dark brown Java glaze Willow Slate: A cool mid-tone gray paint with a gray Slate glaze
Cherry Stains Natural Cherry: A warm natural wood with a light sap stain Light Cherry: A warm light cherry stain Dark Cherry: A warm dark cherry pre-stain with a medium stain Maple Stains Medium Maple: A warm medium maple pre-stain with a light stain Maple and Hickory Stains Ash Maple and Hickory: A warm light gray stain Maple, Oak and Hickory Stains Natural Maple, Oak and Hickory: A warm natural wood with a top coat Light Maple, Oak and Hickory: A warm light stain Boardwalk Maple, Oak and Hickory: A warm translucent stain Coffee Maple, Oak and Hickory: A warm brownish-black stain Oak and Hickory Stains Dark Oak and Hickory: A warm dark stain
Medium Oak and Hickory: A warm medium stain Cherry, Maple, Oak and Hickory Stains Caramel: A warm medium caramel brown stain Castle: A very light gray stain Drift: A warm transparent gray stain Espresso: A warm brown stain 5% Nightfall: A dark gray stain Peppermill: A warm dark brown stain River Rock: A warm blond earth tone brown stain Bleu: A cool dark French blue painted finish Bright White: A cool bright white painted finish Cape: A cool blue-gray painted finish Divinity: A warm off-white painted finish Dove: A cool light gray painted finish Glacier: A cool white painted finish Gray Mist: A light toned warm gray painted finish Onyx: A cool black painted finish Pebble: A warm taupe painted finish Whisper: A warm very light gray painted finish Willow: A cool mid-tone gray painted finish Sable: A warm medium brown stain Sienna: A warm dark brown stain Paints 15% Alabaster: A warm white painted finish
Sheen: All Stains, Stains with Glazes, Paints and Paints with Glazes will have a low sheen top coat.
THE SELECT SERIES — DOOR MATERIAL DESCRIPTIONS
Due to the natural beauty and inherent variability of trees, any solid or veneer wood will exhibit some variation in color and grain, and no two pieces are alike. Exposure to sunlight, smoke, household chemicals and other environmental conditions will affect the appearance of the finish over time.
Hickory is an exceptionally dense and strong hardwood which features a course, straight grained texture. It is characterized by striking, contrasting colors ranging from creamy white to dark brown and black, potentially within the same piece of wood. All tones of Hickory could include mineral streaks darker in color. Extreme random variation in color and grain is expected. Because of this color variation it is recommended to view a wide selection of samples to become familiar with the overall final aesthetic of purchased items. Hickory will darken over time particularly with exposure to light. Hickory Using high pressure and temperatures, WellCore MDF is formed by combining wood fibers with a wax resin binder to form panels making it more dense than standard par- ticle board. This makes WellCore MDF a durable, smooth surface for cabinetry Medium Density Fiberboard
Cherry is known for its unique and beautiful color, grain patterns, and distinctive features. These include small pin knots, pitch pockets, and grain variations appearing as waves or curls. These features distinguish Cherry and are common in this species. The wood itself includes both sapwood, which ranges from white to yellowish, and heartwood, which has a rich reddish-brown hue. As Cherry ages it’s appearance will noticeably darken and mellow in color. This change occurs faster than other species, particularly with exposure to natural light. Cherry Maple is known for its typically straight, uniform grain pattern. While generally a consistent creamy white it can have slight variation from a bright white to a light pink or a light reddish brown. Maple will occasionally show small mineral streaks, bird’s eye, and wavy or burl graining. As maple ages and is exposed to light it will take on a slight change in color to an amber or yellowish hue. Maple Red Oak is an open-pored wood which varies from close knit vertical grain to prominent and arched patterns. Oak can have drastic color variation featuring dark mineral streaks, flecking, and small pink pinholes. Wellborn’s lumber processing produces product with straighter grains, and reduced widths of cathedrals than most other cabinet lines. Oak will darken over time particularly with exposure to light. Oak
Select–1–20
THE SELECT SERIES — WOOD DOOR STYLES ARLINGTON SQUARE
TRADITIONAL OVERLAY
WOOD SPECIES: Cherry Maple Oak
2 1 / 4
PRICE COLUMN: 1
ORDERING CODE: ARS
Notes: • Adjustable Concealed Hinges • Profiled Door and Drawer Front Edges • Veneer Recessed Center Panel • When painted maple is ordered the center panel will change to MDF
Detail
Wall
Base
Standard Drawer Front Configuration
DOOR/DRAWER CONSTRUCTION
Door Construction
Five Piece Drawer Front Construction
– All slab
– 8” to 24” wide – Recessed Center Panel – Standard Stiles and Rails
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Arlington Square • All cope and tenon doors greater than 48” high will have a center rail and two panel openings • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Decorative Door Frame
Traditional Mullion Style
Select–1–21
THE SELECT SERIES — WOOD DOOR STYLES BEDFORD SQUARE
FULL OVERLAY
WOOD SPECIES: Cherry Maple Oak Hickory
2 9 / 16
PRICE COLUMN: 5
ORDERING CODE: BFS
Notes: • Profiled Door and Drawer Front Edges • Solid Wood Raised Center Panel • When painted maple is ordered the center panel will change to MDF • Classic Drawer Front Option Available • Hardware opening top drawer: 1”
Detail
2 9 / 16
Wall
Base
Standard Drawer Front Configuration
Classic Drawer Front Option
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Raised Center Panel – Standard rails and stiles
– Less than 4 5 ⁄ 8 ” high Slab
– 4 5 ⁄ 8 ” to 6 1 ⁄ 8 ” high – Recessed Center Panel – Reduced rails vary – Standard stiles – 6 3 ⁄ 16 ” to 9 13 ⁄ 16 ” high
– Greater than 9 13 / 16 ” high – Raised Center Panel – Standard rails and stiles
– Recessed Center Panel – Standard rails and stiles
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Bedford Square • All cope and tenon doors greater than 48” high will have a center rail and two panel openings • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Decorative Door Frame
Traditional Mullion Style
Select–1–22
THE SELECT SERIES — WOOD DOOR STYLES CONCORD
FULL OVERLAY
WOOD SPECIES: Maple
2 1 /
4
PRICE COLUMN: 5
ORDERING CODE: CRD
Notes: • Classic Miter • Adjustable Concealed Hinges • Profiled Door and Drawer Front Edges • Veneer Raised Center Panel for all available finishes • Five Piece Drawer Front with Veneer Recessed Center Panel • Slab Drawer Front Option Available • Hardware opening top drawer: 1 5 ⁄ 8 ”
Detail
Wall
Base
Standard Drawer Front Configuration
Slab Drawer Front Option
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Raised Center Panel – Standard rails and stiles
– Less than 4 5 ⁄ 8 ” high Slab
– 4 5 ⁄ 8 ” to 6 1 ⁄ 8 ” high – Recessed Center Panel – Reduced rails vary – Standard stiles – 6 3 ⁄ 16 ” to 9 13 ⁄ 16 ” high
– Greater than 9 13 / 16 ” high – Recessed Center Panel – Standard rails and stiles
– Recessed Center Panel – Standard rails and stiles
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Concord • Miter door styles will not have a center rail and will show one continuous center opening • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Decorative Door Frame
Traditional Mullion Style
Select–1–23
THE SELECT SERIES — WOOD DOOR STYLES FRANKLIN
TRADITIONAL OVERLAY
WOOD SPECIES: Maple Oak
2 1 / 4
PRICE COLUMN: 2
ORDERING CODE: FKN
Notes: • Square Door and Drawer Front Edges • Veneer Recessed Center Panel is 3 ⁄ 16 ” Thick • Slab Drawer Front • Classic Drawer Front Option Available • When painted maple is ordered the center panel will change to MDF • Hardware opening top drawer: 1 5 ⁄ 8 ”
Detail
Franklin
2 1/4
Wall
Standard Drawer Front Configuration
Base
Classic Drawer Front Option
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Recessed Center Panel – Standard rails and stiles
– Less than 5” high Slab
– 5” to 6 15/16” high – Recessed Center Panel
– 7” high and greater – Recessed Center Panel – Reduced rails vary – Standard stiles
– Reduced rails – Standard stiles
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Franklin • All cope and tenon doors greater than 48” high will have a center rail and two panel openings • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Shaker Mullion Style
Traditional Mullion Style
Decorative Door Frame
Select–1–24
THE SELECT SERIES — WOOD DOOR STYLES HARMONY
FULL OVERLAY
WOOD SPECIES: Cherry Maple
2 1 / 4
PRICE COLUMN: 3
ORDERING CODE: HMY
Notes: • Classic Miter • Adjustable Concealed Hinges • Profiled Door and Drawer Front Edges • Veneer Recessed Center Panel • When painted maple is ordered the center panel will change to MDF • Five Piece Drawer Front with Veneer Recessed Center Panel • Slab Drawer Front Option Available • Hardware opening top drawer: 1 5 ⁄ 8 ”
Detail
Wall
Base
Standard Drawer Front Configuration
Slab Drawer Front Option
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Recessed Center Panel – Standard rails and stiles
– Less than 4 5 ⁄ 8 ” high Slab
– 4 5 ⁄ 8 ” to 6 1 ⁄ 8 ” high – Recessed Center Panel – Reduced rails vary – Standard stiles – 6 3 ⁄ 16 ” to 9 13 ⁄ 16 ” high
– Recessed Center Panel – Standard rails and stiles
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Harmony • Miter door styles will not have a center rail and will show one continuous center opening • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Decorative Door Frame
Traditional Mullion Style
Select–1–25
THE SELECT SERIES — WOOD DOOR STYLES HARVEST SQUARE
TRADITIONAL OVERLAY
WOOD SPECIES: Cherry Maple Oak
2 1 / 4
PRICE COLUMN: 4
ORDERING CODE: HVS
Notes: • Adjustable Concealed Hinges
• Profiled Door and Drawer Front Edges • Veneer Raised Center Panel (except Cherry which is solid) • When painted maple is ordered the center panel will change to MDF
Detail
Wall
Standard Drawer Front Configuration
Base
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Raised Center Panel – Standard rails and stiles
– All slab
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Harvest Square • All cope and tenon doors greater than 48” high will have a center rail and two panel openings • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Decorative Door Frame
Traditional Mullion Style
Select–1–26
THE SELECT SERIES — WOOD DOOR STYLES MILLBROOK SQUARE
FULL OVERLAY
WOOD SPECIES: Cherry Maple Oak
2 9 / 16
PRICE COLUMN: 3
ORDERING CODE: MBS
Notes: • Profiled Door and Drawer Front Edges • Veneer Recessed Center Panel • When painted maple is ordered the center panel will change to MDF • Classic Drawer Front Option Available • 5-piece Drawer Fronts will have solid Center Panels • Hardware opening top drawer: 1”
Detail
Wall
Base
Standard Drawer Front Configuration
Classic Drawer Front Option
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Recessed Center Panel – Standard rails and stiles
– Less than 4 5 ⁄ 8 ” high Slab
– 6 1 ⁄ 16 ” to 22” high – Recessed Center Panel – Standard rails and stiles
– 4 5 ⁄ 8 ” to 6 1 ⁄ 8 ” high – Recessed Center Panel – Reduced rails vary – Standard stiles
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Millbrook Square • All cope and tenon doors greater than 48” high will have a center rail and two panel openings • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Decorative Door Frame
Traditional Mullion Style
Select–1–27
THE SELECT SERIES — WOOD DOOR STYLES PRAIRIE
FULL OVERLAY
WOOD SPECIES: Cherry Maple Oak Hickory
2 9 / 16
PRICE COLUMN: 4
ORDERING CODE: PRA Notes: • Adjustable Concealed Hinges • Square Door and Drawer Front Edges • Veneer Recessed Center Panel is 3 ⁄ 16 ” Thick • Classic Drawer Front Option Available • When painted maple is ordered the center panel will change to MDF • Hardware opening top drawer: 2 1 ⁄ 8 ”
Detail
Wall
Base
Standard Drawer Front Configuration
Classic Drawer Front Option
DOOR/DRAWER CONSTRUCTION
DOOR CONSTRUCTION
FIVE PIECE DRAWER FRONT CONSTRUCTION
– 8” to 24” wide – Recessed Center Panel – Standard rails and stiles
– Less than 4 5 ⁄ 8 ” high Slab
– 6 1 ⁄ 16 ” to 22” high – Recessed Center Panel – Standard rails and stiles
– 4 5 ⁄ 8 ” to 6 1 ⁄ 8 ” high – Recessed Center Panel – Reduced rails vary – Standard stiles
DOORS PREPPED FOR GLASS
• Mullion and Decorative Door Inside Profile: Prairie • All cope and tenon doors greater than 48” high will have a center rail and two panel openings • Not available for open cabinets without doors, any cabinet with a kit installed or cabinets with options that remove the doors
Shaker Mullion Style
Traditional Mullion Style
Decorative Door Frame
Select–1–28
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196 Page 197 Page 198 Page 199 Page 200Made with FlippingBook Online document maker