THE SELECT SERIES — STANDARD CONSTRUCTION SPECIFICATIONS
F inish Cabinet components are machine sanded to prepare the surface for staining. Wellborn hand rubs the stain to enhance the natural wood grain. Three coats of finish, including two coats of high moisture resistant sealers and one top coat of high molecular weight synthetic catalyzed varnish, result in a durable finish. Natural finishes receive two coats of sealer and one top coat. The Select Series has a machine sanded finishing process and does not include the detailed hand sanding technique featured in the Premier Series. The following door styles are shared between Select and Premier: Alto, Bishop and Prairie. These will have the Select Series quality sanding and finishing even when ordered in the Premier Series. Wellborn Cabinet, Inc. does not recommend designs combining these series. F ace F rames 1¾” x ¾” Thick kiln-dried solid wood stile and rail members. The center stiles are ¾” x 3½” solid wood. On all blind corner base and blind corner wall cabinets, the center stiles are ¾” x 6½” solid wood. All face frame joints are precisely aligned with blind mortise and tenon, glued and stapled at all joints. E nd P anels ½” Thick industrial grade furniture board with natural maple wood grain laminate exterior resistant to household chemicals. Interior is wood grain laminate. The top and bottom edges of wall cabinet end panels are banded with wood grain edge banding. End panels are machined to accept tops, bottoms and back panels. W all C abinet T ops and B ottoms & B ase C abinet B ottoms ½” Thick industrial grade furniture board. These components are laminated with wood grain laminate. A dado joint, glue and staples are used to attach the top and bottom into face frames, end panels and hanging rails.
B acks
All backs are 1 ⁄ 16 ” x 3½” laminated fiberboard hanging rails at the top and bottom. Wall cabinet backs are recessed and stapled into end panels, hanging rails and shelves. Base cabinet backs are attached in the same manner; the top and bottom of the base cabinet have 11 ⁄ 16 ” x 3½” laminated fiberboard hanging rails securing the back to the top of the end panel. 8 ” thick wood grain MDF printed on the interior side. Wall cabinet backs are reinforced with 11 ⁄
S helves Wall Cabinets — Adjustable Shelves
All wall cabinet shelves are adjustable and made of ¾” thick industrial grade furniture board. The shelves are laminated with a wood grain laminate which is resistant to water and household chemicals. The front edge of the shelf is banded with wood grain edge banding. The cabinet sides are drilled for shelf supports which are adjustable at 2½” increments. Base Cabinets — Adjustable Shelves All base cabinets have fully adjustable ¾ ” thick industrial grade furniture board shelves. The shelves are 10 9 ⁄ 16 ” deep and laminated with a wood grain laminate. The front edge is banded with a wood grain or white edge banding. B ase T oe B oard The toe kick for base, vanity, utility and oven cabinets is ½” x 4½”— industrial grade furniture board. Toe kicks are unfinished and have rodent proof captive construction. The inner box construction includes ¾” wood grain furniture board drawer sides, and ½” sub-front and back. All backs and sub-fronts are tenoned into the sides, glued and stapled. The drawer box is screwed to the drawer front with four screws and is a full depth drawer. The drawer has a 75 lb. weight capacity. Bottoms 1 ⁄ 8 ” Wood grain printed hardboard drawer bottoms dadoed to accept both sides, glued and stapled. D rawer S lides Drawers have epoxy coated side mount captive slides that provide smooth, easy operation. The slide has positive stop opening and self-closing features. Drawer slides fit into a bracket mounted to the hanging rail. The bracket allows horizontal drawer adjustability. D rawer — I nner B ox C onstruction Sides, Sub-Front and Back
6–W ay A djustable C oncealed H inges Hinges are 6-way adjustable, chrome finished and self-closing with a concealed hinge design.
Select–1–13
Made with FlippingBook Online document maker