SINK BASE CABINETS
SB24 SB27 SB30 SB33 SB36 1 Drawer blank, 2 Doors w/o center mullion
SB18 L/R SB21 L/R SB24SD L/R
34 1 / 2
34 1 / 2
1 Drawer blank, 1 Door
• Must specify L or R hinge • All FOL door styles have spacer added to back of drawer blank to make flush with doors
24
24
24, 27, 30, 33, 36
18, 21, 24
• All FOL door styles have spacer added to back of drawer blank to make flush with doors
SB39 SB42 SB45 SB48
SB54 SB60
2 Drawers, 2 Drawer blanks, 4 Doors
2 Drawer blanks, 2 Doors
• All FOL door styles have spacer added to back of drawer blank to
• All FOL door styles have spacer added to back of drawer blank to make flush with doors
make flush with doors • Doors hinged L, L, R, R
DESIGN NOTE Order with storage already built-in! See the Modification Section for more options.
Modification APC BO ES FCE FDBS FH FI FIMD FO ID MFE P PCE PWD RD RTK TKA VTK WCM WDSC SEL ● ● ● ● ● ● ● ● ● ● ● ● ● ● s ● ●
SINK BASE MAT
SINK BASE STORAGE SHELF
SBM
SBSS • No floor • ½” Plywood
18
18
• White polystyrene • Mat is used to protect the bottom of the sink base from water due to minor leaks only • Measures 21½” D and 45¼” W • Trim to fit
45
1 / 4
21 1 / 2
10
TILT OUT TRAYS TOT36S-TOT48S TOT36S-TOT48S
TOT39S (for SB39)* TOT42S (for SB42)* TOT45S (for SB45)* TOT48S (for SB48)* TOT54S (for SB54)* TOT60S (for SB60)*
TOT18S (for SB18) TOT21S (for SB21) TOT24S (for SB24, SB24SD)
• Stainless finish • Includes two hinges per tray * Contains 2 trays
3
TOT27S (for SB27) TOT30S (for SB30)* TOT33S (for SB33)* TOT36S (for SB36)*
3
2 1 / 8
2 1 / 8
TOT36W • Fits all SB cabinets • Trimmable to make two Tilt Outs • Includes a 36” wide, white tray, two sets of hinges, two pair end caps and tube adhesive
Select–3–5
Made with FlippingBook Online document maker