Select Specification Catalog

THE SELECT SERIES — MODIFICATIONS (continued) AC — Appliance Cutouts

Factory appliance cutouts are available on many cabinets that notate a Min/Max cutout area. This option allows you to specify the cutout opening measurements in 1/16” increments up to the maximum opening allowed for the cabinet. This option is not intended for flush inset appliances installation. See individual cabinet specifications for min/max cutout details. The cutout will be centered within the specified area and routed out which creates rounded corners in the cutout area. Inside edge of cut out will be unfinished. For Farmhouse Sink and Apron Front bases the cutout will be centered and will come down from top rail to specified height. Appliance drawer bases the cutout will start from bottom edge of top rail and cut up to specified height.

This option is not available with Finished Interior options or the following frame modifications: Extended Stile

Codes: APPLIANCE CUTOUT TOP OPENING ACTOPW- Appliance cutout top width ACTOPH- Appliance cutout top height APPLIANCE CUTOUT MIDDLE OPENING ACMIDW- Appliance cutout middle width ACMIDH- Appliance cutout middle height APPLIANCE CUTOUT BOTTOM OPENING ACBOTW- Appliance cutout bottom width ACBOTH- Appliance cutout bottom height

* For each opening section chosen (top, middle, bottom) both width and height codes must be selected and populated. For pricing purposes each opening is considered a cutout even though two codes (width & height) will be used per opening.

1 st cutout opening add $200 List to cabinet 2 nd cutout opening add an additional $100 List 3 rd cutout opening add an additional $100 List

ACTOP - APPLIANCE CUTOUT TOP OPENING

DO3396

DESIGN NOTE: Single opening cabinets will always get ACTOP.

cutout centered

UMC3042

AFB36

ACTOPW ACTOPH

ACTOPW ACTOPH

ACTOPW ACTOPH

Applicable to following Cabinets: ACDDB, ACO, ADB, AFB, BMC, BOC, DO, DOWD, FRB, FRDB, MO, MOC, SO, SOD, TO, UMC

ACBOT - APPLIANCE CUTOUT BOTTOM OPENING

MO3396

TO3396

DESIGN NOTE: ACBOT option only applies to cabinets with at least two openings.

ACBOTW ACBOTH

ACBOTW ACBOTH

Applicable to following Cabinets: Microwave Oven Combination (MO) & Triple Oven (TO)

Select–1–62

Made with FlippingBook Online document maker