This rotating tool clamp can be fixed in any orientation or adjusted to provide 90° vertical and horizontal movement, allowing tools to be positioned precisely for angled fastening tasks. Either plane can be fixed when needed, giving operators the flexibility to lock the tool in place for repeatable, controlled operations. Its versatile design makes it well-suited for tight workspaces and applications that require frequent angle adjustments.
ROTATATING TOOL CLAMP FOR USE WITH LTS & ATS TORQUE ARMS QUICK REFERENCE GUIDE (ITEM # 509343)
The rotating tool clamp provides an operator flexibility to adjust and move the power tool into various positions for the fastening process. For Use with LTS linear torque arms and ATS articulated torque arms
Adjust the positioning
What’s in the Box : The Mountz torque arm is packaged with four components that need to be assembled. Bag A Bag B
ROTATING TOOL CLAMP
ADAPTER FASTENER
ADAPTER INSERT
LOCKING PIN
Rotating Tool Clamp Installation onto Torque Arm 1. Press the adapter insert from Bag A into the adapter Bag B. Ensure you press the insert from the side of the adapter locking pin.
ADAPTER
2. Choose how much vertical play you would like. Choose between a fixed position or a 90° range.
FIXED
90°
INSERT
3. Attach the adapter assembly to the rotating tool holder by using the fastener that was included. 2. Ensure the square end of the adapter insert is inserted into the flat, square of the rotating tool holder.
Engineered in the Silicon Valley Since 1965
Copyright © 2025 Mountz Inc. All Rights Reserved. V1/060125
ROTATATING TOOL CLAMP FOR USE WITH LTS & ATS TORQUE ARMS QUICK REFERENCE GUIDE (ITEM # 509343)
4. Adjust the horizontal play by adjusting the fastener on the rotating tool holder. You can choose a fixed position or 90°.
5. To attach the rotating tool holder assembly onto the torque arm, start by removing the current tool holder from the torque arm.
LOOSEN THIS FASTENER TO REMOVE CURRENT HOLDER.
6. Attach the rotating tool clamp assembly onto the torque arm by tightening the tool holder fastener.
LOOSEN THIS FASTENER TO REMOVE CURRENT HOLDER.
For Right Angle Tools You can adjust the tool holder to support a right angle tool. To use this tool holder with a right angle tool, we recommend using on an LTS (linear) arm. Install the holder per the images.
Scan for Manual
Scan for Warranty & Returns Policy
Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com
Engineered in the Silicon Valley Since 1965
Copyright © 2025 Mountz Inc. Todos los derechos reservados V1/060125
Page 1 Page 2Made with FlippingBook - Online catalogs