FOOD GRADE CLEANING & LUBRICATION
Ambergrease FG3
Assembly Grease FG
Moisture Remover FG
For use on all types of bearing in food, drinks, and consumables processing. Ideal for end-of-line conveyor lubrication, conveyor drive motors, and packing areas. NSF H1 registered (N° 140248) for use in the food industry. Provides stable, long-term lubrication. Operational temperature range: -20°C to +140°C.
Use in the same manner as a Copper Anti-Seize (as a general anti-seize) but also aids with the running in of bearings whilst grease is worked. Particularly effective as an anti-seize on oven fans. Can be used as a high temperature ejector pin lube for moulding white plastic food cartons. NSF H1 registered (N°138266 and 139900).
For use on equipment to displace moisture, particularly after wash-down or because of water ingress. Ideal for use on electronics. NSF H2 registered (No.142299) for use
in the food and beverage industry. Provides precision lubrication by its thin, high dielectric strength, lubricating film, can be used as a multi-purpose lubricant.
Resists water wash-out, extending re-lubrication intervals when used as a service lubricant. Operational temperature range: -30°C to +1100°C. NSF H1 Assembly Lubricant & Anti-seize Compound 0229
NSF H1 Multi-purpose Bearing Grease 0229
NSF H2 Registered Dewatering Fluid 0229
Volume Grams
Volume Grams
Volume Millilitres
6150009490
6150009390
6150009530
400
500
500
Tech Sheet 20710
Tech Sheet 20712
Tech Sheet 20716
MOULDING RANGE
HD-Sil Release
Mould Solv
Mould Protective
Ideal for removing general mould residues and release coatings Highly effective low odour, degreasing agent that also removes anti-corrosion, storage coatings Efficiently cleans plastic, ferrous and non ferrous coatings.
Exhibits excellent anti stick and slip properties. Particularly effective in mould release and injection moulding operations. Ideal for use where a clean, colourless lubrication is required. Operational up to +200°C. Easily removed with solvent cleaners.
Non-silicone corrosion inhibitor for injection moulding tools and dies. Repels and displaces moisture, leaving a durable, non-greasy, protective film
Heavy-duty Silicone Release Agent 0229
Cleaner for Moulds & Tools 0229
Mould Corrosion Inhibitor 0229
Volume Millilitres
Volume Millilitres
Volume Millilitres
31631-AD
31970-AA
6120005000
500
500
400
Tech Sheet 20718
Tech Sheet 20720
Tech Sheet 20722
Clear Mould Protective
No-Sil Release
Tool Guard
14
Provides a wet, heavy-duty film for the release of plastic and rubber parts. For use in injection moulding, vacuum forming and many other moulding and forming processes. Operational up to +170°C.
A light green, viscous, protective coating for use on mould tools. Remove moisture and provides long term protection to surfaces. Easy identification with total coverage assured. Will not penetrate or creep into mould tool. Resists the effects of high humidity and acid finger marking Excellent corrosion protection.
Use on mould tools as a long-term protective coating for storage. Repels and displaces moisture, leaving a durable, clear, protective film
Heavy-duty Non-silicone Release Agent 0229
Highly Visible Corrosion Inhibitor 0229
Transparent Corrosion Inhibitor 0229
Volume Millilitres
Volume Millilitres
Volume Millilitres
31971-AA
31972-AA
6120005500
500
500
400
Tech Sheet 20719
Tech Sheet 20721
Tech Sheet 20723
1581
Made with FlippingBook - professional solution for displaying marketing and sales documents online