THREAD STICKS & THREADLOCKERS
577 Thread Sealant
243 Threadlocker
Threadlocker Sticks
Particularly suitable for all coarse metal threads. Suitable for past applications at low temperatures e.g. outdoor plant maintenance. Carries the German DVGW Approval (No 96.04e 125). Tested in accordance to EN 751-1. Meets BS 6956 type B for sealing gas fittings • Replaces hemp/tapes and pastes • Liquids ensure complete contact between threads provides 100% seal • Liquids will not creep, shrink or block systems (including filters) by shreddin • Disassembly can be achieved easily with normal tools
Particularly suitable on all metal threaded fasteners. Prevents loosening on vibrating parts such as pumps, motor mounting bolts, gear boxes or presses. Recommended for use where disassembly with hand tools is required for servicing and where parts are contaminated with oil. • Resists vibration • Single part – clean and easy to apply • Can be used on all sizes of fasteners – reduces inventory costs • Seals threads allows through-hole tapping
• Effective on all types of metal threaded fasteners. Recommended where disassembly is required. Machine tools and presses, pumps and compressors, mounting bolts and gear boxes.
• For use on threads up to M50 • Functional strength 6 hours • Long term temperature resistance +150°C
248, Medium Strength 0753
Volume Grams
LOC-248
19 Tech Sheet 67925
Medium Strength 0753
• Effective on all types of metal threaded fasteners. Recommended for use where regular removal for maintenance is not required. Suspension bolts, motor transmission and pump mounts, bearing cap bolts and studs.
General Purpose 0753
Volume Millilitres
LOC-135279 LOC-135278
Volume Millilitres
10
LOC-229342
50 Tech Sheet 68057
50 Tech Sheet 67929
• For use on threads up to M50 • Functional strength 24 hours • Long term temperature resistance +150°C
270 Threadlocker
542 Thread Sealant
268, High Strength 0753
Particularly suitable for use on all metal fasteners (including stainless steels and those with protective coatings such as Zinc) where regular removal for maintenance is not required. Recommended for permanently locking studs on engine blocks
Particularly suitable for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. Carries the German DVGW approval (No.96.02E 125). Tested in accordance to EN 751-1. Meets BS 6956 type A for sealing gas fittings • Replaces hemp/tapes and pastes • Liquids ensure complete contact between threads provides 100% seal
Volume Grams
LOC-268
19 Tech Sheet 67926
and pump housings. • Resists vibration
• Single part – clean and easy to apply • Can be used on all sizes of fasteners – reduces inventory costs • Seals threads allows through-hole tapping
Thread Sealant Stick
• Liquids will not creep, shrink or block systems (including filters) by shredding • Disassembly can be achieved easily with normal tools
• Recommended for all coarse metal pipe threads where disassembly is required. Ideal for use in a broad range of industries including chemical, processing, waste water treatment and automotive.
• For use on threads up to 3” • Substrate to be sealed: Metal • Instant low pressure seal • Low disassembly strength • Long term temperature resistance +150°C
Hydraulic & Pneumatic 0753
High Strength 0753
Volume Millilitres
LOC-135483 LOC-267431 LOC-267432
Volume Millilitres
10 50
561, Instant Bonding 0753
LOC-267380 LOC-232515
10
50 Tech Sheet 67930
250 Tech Sheet 67932
Volume Grams
LOC-561
19 Tech Sheet 67927
276 Threadlocker High Strength Fast Fixture • High strength, even on passive metals • European gas approval (EN 751-1) • Excellent chemical and thermal resistance of cured product • Reliable cure even at low temperatures
2701 High Strength Oil Resistance
14
Anti-Seize Sticks
• For the high strength locking and sealing of studs, nails and bolts • Vibration proof • Ideal for use on inactive
• Copper based anti-seize for screws, nuts, pipes, heat exchangers etc. • Sold lubricating agent containing copper and graphite • N.L.G.I. Class 1
substrates and/or where maximum resistance to hot oil is required
Working Temperature: -30°C to +930°C
8065, C5-A Copper, High Temperature 0753
0753
Volume Millilitres
0753
Volume Millilitres
Volume Grams
LOC-1266117
LOC-234853
LOC-8065
50 Tech Sheet 67931
50 Tech Sheet 67933
20 Tech Sheet 67928
1584
Made with FlippingBook - professional solution for displaying marketing and sales documents online