SEALANT, RETAINER, SUPER GLUE & TAPE
572 Low Strength Slow Cure Pipeseal • This product is designed for the locking and sealing of metal pipes and fitting • The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration • The thrixotropic nature reduces the migration of liquid product after application to the substrate
5400 Health & Safety Pipe Sealant • No hazard symbols, no risk phrases • White material safety data sheet • No need for COSHH assessment • WRAS Approved
641 Bearing Fit Retainer
Particularly suitable for retaining parts such as bearings, and when later dismantling will be needed. • High and moderate strength products – can carry high loads and eliminate fretting • Fill all voids – prevent corrosion • Reduce the need for close tolerances • 100% contact – load and stress is distributed evenly over the joint
0753
Volume Millilitres
0753
Volume Millilitres
LOC-1545634 LOC-1546964
LOC-267442 LOC-135522
50
10
250 Tech Sheet 67944
50 Tech Sheet 67947
0753
Volume Millilitres
LOC-229360
50 Tech Sheet 67941
603 Retainer
Super Glue
574 Flange Sealant
Particularly suitable for retaining close fitting cylindrical parts (up to 0.1mm gap), and for use on cylindrical fitting parts where thorough degreasing is not possible. Tested and approved for use on bearings. • High and moderate strength products – can carry high loads and eliminate fretting • Fill all voids – prevent corrosion • Reduce the need for close tolerances • 100% contact – load and stress is distributed evenly over the joint
• Seals close fitting joints between rigid metal faces and flange • The product cures when confined in the absence of air between close fitting metal surface
• Provides resistance to low pressures immediately after assembly of flange
Bottle, Brush Application 0753
• Typically used as a form-in-place gasket on rigid flanged connections e.g. gearbox and engine casings, etc. • The thrixotropic nature reduces the migration of liquid product after application to the substrate
Volume Grams
LOC-272597
5
For Retaining Cylindrical Parts 0753
Volume Millilitres
0753
Volume Millilitres
LOC-229873 LOC-135280
10
LOC-267437 LOC-234573
50
50 Tech Sheet 67945
250 Tech Sheet 67942
638 Retainer
518 Flexible Fast Cure
Tube, Squeeze Application 0753
Particularly suitable where dynamic axial and radial loads are present. Recommended for retaining shafts, gears, pulleys and similar cylindrical parts. • High and moderate strength products – can carry high loads and eliminate fretting • Fill all voids – prevent corrosion • 100% contact – load and stress is distributed evenly over the joint
• This product is a single component, medium strength, anaerobic sealant which cures when in the absence of air between close fitting metal surface • Typical applications include sealing close fitting joints between rigid metal faces and flange • Provides resistance to low pressures immediately after assembly of flange • Typically used as a form-in-place gasket on ridged flanged connections, e.g. gearbox and engine casings, etc. • The thrixotropic natures
Volume Grams
14
LOC-272602
3
Duct Tape
reduces the migration of liquid product after application to the substrate
For Retaining Cylindrical Parts 0753
0753
Volume Millilitres
Volume Millilitres
0753
Width mm
Length Metres
LOC-229875
LOC-234795
50 Tech Sheet 67943
50 Tech Sheet 67946
LOC-260499
50
25
1585
Made with FlippingBook - professional solution for displaying marketing and sales documents online