Flowtech Catalogue

MISTING SYSTEMS - CONTROLLERS

FOGCOntroller

Sensor

The FOGCOntroller is a 2 zone 24V AC microprocessor that accepts input from two separate sensors. The controller has 5 independent programmable relays that can control a series of fans, zone valves, and pumps. The controller also includes a programmable time delay NC contact that can be used to terminate all output signals from the controller if a defined condition develops with the system. The humidity settings range from 30% to 99% with a hysteresis range between 1 and 9. The temperature settings range from 70º to 99º with a hysteresis range between 1 and 9. The standard sensor will have an accuracy of +/- 2% from 10% to 70% humidity. It is recommended that the high humidity sensor be used for applications requiring humidity levels above 70%. • The controller requires a 50 Watt 24V AC transformer as a power supply.

For High Humidity

Dimensions cm

9583

Detection Range

Weight g

L

W

H

92906

0 to 99

137

10.2

10.2

2.5

Remote Sensor

2 ;one Microprocessor

Dimensions cm

9583

Weight g

L

W

H

92910

454

15.2

8.9

5.7

FOGCOntroller II

The FOGCOntroller II is a humidity controller, with an internal humidity sensor that provides automated operation of a fog system. The unit can operate based on its internal sensor or it can be wired to an external sensor for high humidity applications. The humidity settings range from 10% to 99% with a hysteresis range between 1 and 5. It is recommended to use the external sensor for humidity levels above 50% and our high humidity sensor for humidity levels above 70%.

For Temperature/Humidity

Dimensions cm

9583

Detection Range

Weight g

L

W

H

92909

0 to 70

91

10.2

5.1

2.5

The FOGCOntroller II is a single zone microprocessor and has two output relays with a programmable delay start and stop. The internal and external sensors are fully calibrated re-flow humidity sensors with digital output that send binary data over RS485 protocol. The sensor will have an accuracy of +/- 2%.

4 Pin Connector

• The controller requires a 50 Watt 24V AC transformer as a power supply.

Single ;one Microprocessor

To Suit FOGCOntroller & FOGCOntroller II

Dimensions cm

Dimensions cm

9583

Weight g

9583

Weight g

L

W

H

L

W

H

94160

92908

182

14

7.6

2.5

10

2.5

2.5

2.5

16

Direct Delivery to Mainland UK only. All include a 2-3 day delivery charge for Mainland UK. For Next Day Delivery , please contact our sales ofmce for a quote.

1696

Made with FlippingBook - professional solution for displaying marketing and sales documents online