Datos técnicos / Technical data
Cast Iron Gear Pumps PNA Datos técnicos / Technical data
PNA
Datos técnicos / Technical data
45 (11,8) 30 (1,82)
54 (14,2) 36 (2,19)
66 (17,3) 44 (2,68)
Caudal bomba Pump ow rate Cilindrada Displacement
36 (9,5)
L/min. 1500 R.P.M. (US. GPM 1500 RPM)
cm 3 /v - cc/rev (in 3 /rev)
24 (1,46)
Group 3
Group 3.5
Series: PNC Material: Nodular cast iron Presión máx. contínua en Cont. max. pressure Presión máx. inter 5 seg. max. Intermittent max. pressure
270 (3916) 300 (4351)
260 (3771) 285 (4133)
bar (PSI) bar (PSI)
Series: PNA Material: Nodular cast iron
Displacement: from 53,33cm©/rev to 150cm©/rev • Pumps with back cover in built valves available. • Multiple pumps available.
Displacement: from 53,33cm©/rev to 150cm©/rev • Pumps with back cover in built valves available. • Multiple pumps available.
R.P.M. máximas Max. R.P.M.
3000
45 (11,8) 30 (1,82)
54 (14,2) 36 (2,19)
66 (17,3) 44 (2,68)
84 (22)
Caudal bomba Pump ow rate Cilindrada Displacement
96 (25,3) 64 (3,90) 180 (2611) 225 (3263)
110 (29)
36 (9,5)
L/min. 1500 R.P.M. (US. GPM 1500 RPM)
73,3 (4,46) 175 bar (2500 PSI) 160 (2321) 200 (2901) 250 bar (3550 PSI) 100 bar (1425 PSI)
400
45 (11,8) 30 (1,82)
54 (14,2) 36 (2,19)
66 (17,3) 44 (2,68)
84 (22)
Caudal bomba Pump ow rate Cilindrada Displacement
96 (25,3) 64 (3,90) 180 (2611) 225 (3263)
110 (29)
36 (9,5)
L/min. 1500 R.P.M. (US. GPM 1500 RPM) cm 3 /v - cc/rev (in 3 /rev)
56 (3,41)
24 (1,46)
56 (3,41) 1:8 Taper Shaft, 4 Bolt European Flange, BSPP Ports, Clockwise Rotation 73,3 (4,46) Mínimas R.P.M. según presión Min. R.P.M. at given pressures
450
cm 3 /v - cc/rev (in 3 /rev) bar (PSI) 13 Tooth Splined Shaft, 2 Bolt SAE-B Flange, BSPP Ports, Clockwise Rotation with Ball Bearing & Shaft Seal 24 (1,46) Presión máx. contínua en Cont. max. pressure
270 (3916) 300 (4351)
260 (3771) 285 (4133) 3014
210 (3046) 250 (3626)
550
Continuous Max Pressure (bar)
Continuous Max Pressure (bar)
Intermittent Max Pressure (bar)
Intermittent Max Pressure (bar)
Displacement (cc/rev)
Displacement (cc/rev)
Presión máx. contínua en Cont. max. pressure 3014
270 (3916) 300 (4351)
260 (3771) 285 (4133)
bar (PSI) bar (PSI)
210 (3046) 250 (3626)
160 (2321) 200 (2901)
Presión máx. inter 5 seg. max. Intermittent max. pressure
bar (PSI)
Aceite recomendado Fluid to be used 1PNC80DE10M
ISO 6743 tipo HM, H
Presión máx. inter 5 seg. max. Intermittent max. pressure R.P.M. máximas Max. R.P.M. 13PNA36DG09R 13PNA45DG09R
24 30 36 44 56
270 270 260 260 210 180 160
300 300 285 285 250 225 200
53.3 66.6 83.3 100
260 260 250 250 225 200 175
290 290 275 275 250 225 200
2500 1PNC150DE10M 1PNC100DE10M 1PNC125DE10M
3000
2500
2000
1750
Viscosidad Viscosity range
13PNA54DG09R 13PNA66DG09R 13PNA84DG09R
ISO 3448 cat. VG3
R.P.M. máximas Max. R.P.M.
100 bar (1425 PSI) 175 bar (2500 PSI) 250 bar (3550 PSI)
3000
2000
1750
400
350
Grado de limpieza del aceite Recommended uid cleanliness 1PNC175DE10M 116.6
19/16 s/. ISO 4406 ó
Mínimas R.P.M. según presión Min. R.P.M. at given pressures 13PNA96DG09R 64 13PNA110DG09R 73.3
1PNC200DE10M
133.3
100 bar (1425 PSI) 175 bar (2500 PSI) 250 bar (3550 PSI)
400
350
450
350
Temperatura de trabajo del aceite Oil temperature 1PNC225DE10M 150
-20°C... +80° -4°F... +176°
Tech Sheet 71712
Tech Sheet 71712
Mínimas R.P.M. según presión Min. R.P.M. at given pressures
450
350
550
-
-
-
4
Other shaft, fl ange, porting or rotation confi gurations available on request.
Aceite recomendado Fluid to be used
550
-
-
-
ISO 6743 tipo HM, HV ó HG
Aceite recomendado Fluid to be used
Viscosidad Viscosity range
ISO 6743 tipo HM, HV ó HG
ISO 3448 cat. VG32-VG46
Viscosidad Viscosity range
Grado de limpieza del aceite Recommended uid cleanliness Temperatura de trabajo del aceite Oil temperature
ISO 3448 cat. VG32-VG46
19/16 s/. ISO 4406 ó RP70H
Grado de limpieza del aceite Recommended uid cleanliness Temperatura de trabajo del aceite Oil temperature 4 236
19/16 s/. ISO 4406 ó RP70H -20°C... +80°C -4°F... +176°F
-20°C... +80°C -4°F... +176°F
4
Made with FlippingBook - professional solution for displaying marketing and sales documents online