QUICK COUPLINGS FOR PLASTIC INJECTION MOULDING
Working Temperature: -15°C to +110°C (when using identification collets 513 and 523 Working Temperature: 0°C to +200°C (when using without identification collets 513 and 523
These Couplings are designed to be connected with cooling systems of plastic injection mouldings. They have a particular structure that assures reduced Size and allows coupling using a single hand.
Temperature and Pressures: The working pressures and working temperatures depend on the type of tube used therefore the values must be determined in accordance with the tubes features. The following values apply only to Aignep products. • Parallel gas in conformity with ISO 228. • Water, cooling water, oil. • Flexible tubes in plastic and rubber.
3
Maximum Working Pressure: 15 bar (1.5Mpa).
410-510 DN8 Series
420-520 DN12 Series
418 90º Female Socket 0220
422 Straight Female Socket, BSPP 0220 Thread 422-12 1/2” Tech Sheet 20602
412 Straight Female Socket, BSPP 0220 Thread 412-1/4 1/4” Tech Sheet 20602
To Suit Hose ID mm
418-10 418-12
10
12 Tech Sheet 20602
425 Straight Female Socket with Hose Tail 0220 To Suit Hose ID mm 425-13 13 425-16 16 Tech Sheet 20602
415 Straight Female Socket with Hose Tail 0220 To Suit Hose ID mm 415-08 8 415-10 10 415-12 12 Tech Sheet 20602
511 Female Plug, BSPP 0220
Thread
511-18 511-14 511-38
1/8” 1/4”
3/8” Tech Sheet 20602
521 Female Plug, BSPP 0220
416 135¡ Socket 0220
513 Collets to suit 511 Female Plugs 0220 Colour 513-RED Red 513-BLUE Blue Tech Sheet 20602
Thread
To Suit Hose ID mm
521-38 521-12
3/8”
416-08 416-12
8
1/2” Tech Sheet 20602
12 Tech Sheet 20602
523 Collets, to suit 521 Female Plugs 0220 Colour 523-RED Red Tech Sheet 20602
391
Made with FlippingBook - professional solution for displaying marketing and sales documents online