PRESSURE BOOSTERS
Air Pressure Booster
The air-to-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally used to locally intensify the input pressure of one or more actuators. As it is entirely pneumatic it can be used when electric devices are not recommended. The booster can be supplied with or without a pressure regulator.
It is mtted with check valves that maintain the outlet pressur e even when the supply of compressed air is switched off. This means it is necessary to interrupt the supply and relieve the circuit before intervening on the device in any way. It is advisable to install a tank after the booster to prevent nuctuations in outlet pressur e.
Technical Data
Booster Ø40
Booster Ø40 with regulator
Booster Ø63
Booster Ø63 with regulator
Bore Fluid
40
63
Filtered unlubricated compressed air. Lubrication, if used, must be continuous.
Threaded port
G1/8
G3/8
5
MPa
0.2-1 2-10
Inlet pressure
bar psi
29-145
MPa
Maximum 2 Maximum 20 Maximum 290 -10 to +60 +14 to +140
Maximum 1.6 (regulated) Maximum 16 (regulated) Maximum 232 (regulated)
Maximum 2 Maximum 20 Maximum 290
Maximum 1.6 (regulated) Maximum 16 (regulated) Maximum 232 (regulated)
Outlet pressure
bar psi
ºC ºF gr
-10 to +50 +14 to +122
-10 to +60 +14 to +140
Operating temperature
Weight
1.380
1.600
4.240
5.350
Mounting Installation
Wall or panel In any position
63
40
Without Regulator 9146
Description
9002100 9002300
40mm Diameter Booster , 12 Ratio 63mm Diameter Booster , 12 Ratio
Air Regulators
To suit Air Pressure Multiplier (Booster) 9193 Description 9002180 40mm Regulator Unit 9002380 63mm Regulator Unit
705
Made with FlippingBook - professional solution for displaying marketing and sales documents online