AIR BRAKE PUSH-IN FITTINGS C-TRUCK 9000 SERIES
Elbow Adaptors
Fittings Assembly in the System To guarantee the tightening of the fitting in the system, make sure that the thread chamfer conforms to the standard ISO 965 or GOST 10549-80. The fittings which have an O-Ring seal on the thread, but no locking nut, have to be screwed into the system with the torque forces as shown in the table below. For the assembly of fittings with locking nut, it is necessary to do the following: 1. Loosen the locking nut 2. Screw the fitting into the system until the O-Ring comes into contact with the system surface 3. Position the fitting according to the suitable angle, moving the body up to 360° 4. Keep the body still 5. Screw the locking nut with torque forces as shown in the table
Table of Materials
Male, Metric 0322
Thread M10 x 1
OD mm
9502-6-M10 9502-6-M12 9502-6-M16 9502-6-M22 9502-8-M10 9502-8-M12 9502-8-M14 9502-8-M16
6 6 6 6 8 8 8 8 8
M12 x 1.5 M16 x 1.5 M22 x 1.5
Parts
Materials
6
M10 x 1
1 Body 2 Insert
Brass
M12 x 1.5 M14 x 1.5 M16 x 1.5 M22 x 1.5 M12 x 1.5 M16 x 1.5 M22 x 1.5 M12 x 1.5 M16 x 1.5 M22 x 1.5 M12 x 1.5 M16 x 1.5 M22 x 1.5 M16 x 1.5 M22 x 1.5 M22 x 1.5 M16 x 1.5 M22 x 1.5 M22 x 1.5
Technopolymer (Brass only for 10/7, 15/11, 16/12, 16/13 and 18/14)
Thread M10 x 1 M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5
Torque force (Nm)
11 - 15 15 - 19 19 - 23 24 - 30 27 - 33 36 - 44
9502-8-M22 9502-10-M12 9502-10-M16 9502-10-M22 9502-10/7-M12 9502-10/7-M16 9502-10/7-M22 9502-12-M12 9502-12-M16 9502-12-M22 9502-15-M16 9502-15-M22 9502-16-M22 9502-16/12-M16 9502-16/12-M22
3 S-rapid 4 Collet
O-Ring NBR
10 10 10
Brass NBR NBR Steel
5 Protective seal 6 O-Ring for thread
10/7 10/7 10/7
7 Locking ring
Straight Adaptors
12 12 12 15 15 16
16/12 16/12
9502-18-M22
18
Tech Sheet 20453
Male, Metric 0322
Male, NPT 0322
Thread M10 x 1
OD mm
Thread
OD mm
9512-6-M10 9512-6-M12 9512-6-M14 9512-6-M16 9512-8-M10 9512-8-M12 9512-8-M14 9512-8-M16
6 6 6 6 8 8 8 8 8
9510-6-02 9510-05-02
M12 x 1.5 M14 x 1.5 M16 x 1.5
1/8” 1/8”
6 8
M10 x 1
M12 x 1.5 M14 x 1.5 M16 x 1.5 M22 x 1.5 M12 x 1.5 M16 x 1.5 M18 x 1.5 M22 x 1.5 M12 x 1.5 M16 x 1.5 M22 x 1.5 M12 x 1.5 M14 x 1.5 M16 x 1.5 M22 x 1.5 M16 x 1.5 M22 x 1.5 M16 x 1.5 M22 x 1.5 M16 x 1.5 M22 x 1.5 M22 x 1.5
Double Push-in, Male, Metric 0322 Thread
9512-8-M22 9512-10-M12 9512-10-M16 9512-10-M18 9512-10-M22 9512-10/7-M12 9512-10/7-M16 9512-10/7-M22 9512-12-M12 9512-12-M14 9512-12-M16 9512-12-M22 9512-15-M16 9512-15-M22 9512-15/11-M16
OD mm
10 10 10 10
9402-12-M16 9402-12-M22
M16 x 1.5 M22 x 1.5
12 12
Tech Sheet 20453
Female, Metric 0322
10/7 10/7 10/7
Thread M10 x 1
OD mm
9463-6-M10 9463-6-M16 9463-8-M10
6 6 8
M16 x 1.5
12 12 12 12 15 15
M10 x 1
Male, NPT 0322
Thread
OD mm
15/11
9500-6-02 9500-05-02
1/8” 1/8”
6 8
9512-16-M22
16
9512-16/12-M16 9512-16/12-M22
16/12 16/12
Tech Sheet 20453
9512-18-M22
18
Tech Sheet 20453
891
Made with FlippingBook - professional solution for displaying marketing and sales documents online