GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
The participant will show interest and awareness of hazards from moving and stationary parts in the WTG (Ability, basic level).
The instructor shall:
Present examples of restricted spaces, slippery surfaces, and proper housekeeping.
restricted spaces,
slippery surfaces, and proper housekeeping in relation to lifts in WTGs.
The participants shall:
Engage in discussions and share experiences on the topic.
Conduct a short questionnaire test to recap on the theory and safety issues from lesson 3.
Check own answers and solutions from the shown fact list on completion of the test.
Note: The ability to take necessary safety precautions when using and working on lifts in a WTG must be practised during all practical training elements when relevant.
Lesson 4 - GATES AND FENCES
15 min.
The aim of this lesson is to enable the participants to inspect and ensure the free movement of the gates and fences in the WTG. After having successfully completed lesson 4 of the Lift Commission and Inspection Module, the participants can:
Explain the free movement of mechanical parts in gates and fences outside a lift (Knowledge, intermediate level).
Learning objectives:
The participants can recognise and examine the free movement of mechanical parts in lift gates and fences (Knowledge, basic level).
The instructor shall:
Present and demonstrate examples of movement of mechanical parts in lift gates and fences. Lead or facilitate discussion on the free movement of mechanical parts in lift gates and fences.
Global Wind Organisation www.globalwindsafety.org
30 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online