GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
Lesson 6 - CABIN GUIDE UNIT
60 min.
The aim of this lesson is to enable the participants to inspect the guiding system responsibly in accordance with and following instructions in the relevant manuals and inspection lists.
After successfully having completed lesson 6 of the Lift Commission and Inspection Module:
The participants can explain how to do a visual inspection of the cabin guide units (with rollers) in a lift (Skills, intermediate level).
Learning objective:
The participants can explain the characteristics of different lift guiding systems (Knowledge, intermediate level).
The instructor shall:
Introduce the lesson by presenting examples of guiding systems:
Wire guided.
Ladder guided.
Rack and pinion.
Lead or facilitate discussion on lift guiding systems principles.
The participants shall:
Engage in discussions and share experiences of different lift guiding systems.
Learning objectives:
The participants can perform an inspection of labels on wire ropes (skills, intermediate level). The participants can explain how to do a visual inspection of the guide ropes according to ISO 4309 (Knowledge, intermediate level). The participants can examine guide ropes and recognise when these are in flawless condition e.g. Ø 12 at the lowest landing (Knowledge, basic level). The participants can perform a rope tension inspection of the guide ropes (Skills, intermediate level). The participants can take initiative and take responsibility to adjust guide ropes tension to the specified value (Ability, intermediate level).
Global Wind Organisation www.globalwindsafety.org
34 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online