GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises.
Learning objectives:
The participants can describe how to do a visual inspection of the placement of the pins in the axes of the upper and lower hatches (Knowledge, basic level). The participants can describe how to inspect the operation of the magnet system or latch on the upper hatch (Knowledge, basic level). The participants show interest in ensuring, that the handle strings of the upper and lower hatches are properly installed and have the correct length (Ability, basic level).
The instructor shall:
Demonstrate how to perform a visual inspection of the placement of the pins in the axes of the upper and lower hatches. Demonstrate how to inspect the operation of the magnet system or latch on the upper hatch. Demonstrate and facilitate or lead a discussion on the installation and dimensions of the handle strings of the upper and lower hatches.
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises.
Conduct a short questionnaire test to recap the theory and safety issues from lesson 9.
Check own answers and solutions from the shown fact list on completion of the test.
Lesson 10 - LIFT OPERATION/MANOEUVER PANEL (LOP)
15 min.
The aim of this lesson is to enable the participants to verify and ensure that the Lift Operation/Manoeuver panel is fully operational.
After successfully having completed lesson 10 of the Lift Commission and Inspection Module:
The participants can on own initiative take responsibility of inspecting and testing the LOP and require repair when needed according to the relevant manual (Ability, intermediate level).
Global Wind Organisation www.globalwindsafety.org
42 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online