GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
The instructor shall:
Demonstrate how to perform a function test of the Emergency Rescue System.
Facilitate that participant practise how to function test the Emergency Rescue System.
The participants shall:
Practise how to function test the Emergency Rescue System.
Conduct a short questionnaire test to recap the theory and safety issues from lesson 10.
Check own answers and solutions from the shown fact list on completion of the test.
Lesson 11 - SUSPENSION/CROSSBEAM
25 min.
The aim of this lesson is to enable the participants to inspect the suspension/crossbeam and report errors and omissions in accordance with the relevant manuals and inspection lists.
After successfully having completed lesson 11 of the Lift Commission and Inspection Module:
The participants can take the responsibility for assessing the condition of the suspension/crossbeam, seek guidance in lift manuals and directives and decide relevant and responsible action in case of defects and damages including reporting (Ability, intermediate level).
Learning objectives:
The participants can explain how to do a visual inspection of all parts for damage, cracks, corrosion (Knowledge, intermediate level). The participants can explain how to do a visual inspection of all welds for damage and cracks (Knowledge, intermediate level).
The instructor shall:
Present examples of damage, cracks, and corrosion in connection to the suspension/crossbeam and its welds.
Distribute images of examples of damages, cracks and corrosion to the participants and facilitate discussions in pairs on damage, cracks and corrosion and what actions to take, if such are discovered. Each pair should discuss one image for one minute, and then swap the images amongst the participants to initiate discussions on each new image in turn.
Global Wind Organisation www.globalwindsafety.org
44 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online