GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
The participants shall:
Engage in discussions and share experiences on how and what to inspect in relation to labels and type plates.
Learning objectives:
The participants can perform a visual inspection of an attachment to the lift (Skills, intermediate level). The participants can perform a wear test of the centrifugal brake (speed test, downwards velocity during emergency descent) e.g. with 2 persons max. 26 m/min (Skills, intermediate level). The participants can describe how to do a visual inspection for leaks on drive unit and report according to the relevant lift manuals or instruction (Knowledge, basic level).
The instructor shall:
Demonstrate examples of:
How to inspect the attachment to the lift.
How to do a wear test of centrifugal brake.
How to check the operation of motor break at top- and bottom drive unit.
How to do a speed test during emergency descent.
How to do a visual inspection for leaks on drive unit and report in case of leaks.
Facilitate practical training on:
How to do a wear test of centrifugal brake.
How to do a speed test during emergency descent.
The participants shall:
Engage in the practical training, share experiences on hoist and drive units, and apply the received feedback in following learning activities.
Learning objectives:
The participants can explain how to do a visual inspection of the wiring (El) to drive unit (Knowledge, intermediate level).
Global Wind Organisation www.globalwindsafety.org
52 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online