GWO Lift Commission and Inspection Training Standard V0
2021-10-01_TS_LCI_V0
The participants can explain how to do a visual inspection of the electrical wiring (Knowledge, intermediate level). The participants can explain how to do a visual inspection of the centrifugal system as described in the relevant manual (Knowledge, intermediate level). The participants can perform function and wear test of pinch- and centrifugal pulley (Skills, intermediate level).
The instructor shall:
Present key points in relation to the inspection of the general condition of fall arrest devices in different lift types. Lead or facilitate discussion on differences between different fall arrest devices in different lift types.
The participants shall:
Engage in the practical training, reflect on the received feedback, and take active part in discussions and share experiences working with fall arrest devices.
Lesson 16 - SUPPLY CABLE
10 min.
The aim of this lesson is to enable the participants to inspect the supply cable and cable bin in accordance with the relevant manuals and inspection lists.
After successfully having completed lesson 16 of the Lift Commission and Inspection Module:
The participants can perform an inspection of a supply cable and cable bin as described in the relevant manuals (Skills, intermediate level).
Learning objectives:
The participants can explain how to do a visual inspection of the feed-in of a supply cable (Knowledge, intermediate level).
The instructor shall:
Demonstrate how to inspect a supply cable.
Lead or facilitate discussion on safety issues in relation to inspecting feed-in of a supply cable.
Global Wind Organisation www.globalwindsafety.org
56 / 69
Made with FlippingBook - professional solution for displaying marketing and sales documents online