Pressure Fluid Safety module
The participants can perform pre-use check of pressure fluid test equipment and hoses (Skills, intermediate level).
The instructor shall:
Create exercise(s) for the participants in the pre-use inspection of pressure fluid test equipment and hoses (e.g. scenarios where the participants must determine if the equipment is faulty or not).
The participants shall:
Engage in the exercise(s) and practise performing pre-use inspections on pressure fluid test equipment and hoses.
The instructor shall:
Give constructive feedback to the participants pre-use inspections on pressure fluid test equipment and hoses.
ELEMENT 5.4 - TEST OF THE ABSENCE OF PRESSURE
Learning objectives:
The participants can discuss the importance of always testing for the absence of pressure before working on a pressure system (Knowledge, intermediate level). The participants can act independently in safely and correctly using a pressure manometer to test for the absence of pressure (Ability, intermediate level).
The instructor shall:
Facilitate group discussions about the importance of always testing for the absence of pressure before working on a pressure system and give constructive feedback to the participants discussions through out.
The participants shall:
Engage in discussions and share their understandings or experiences about the importance of always testing for the absence of pressure before working on a pressure system.
The instructor shall:
Create exercise(s) for the participants in how to safely and correctly use a pressure manometer to check for the absence of pressure and give constructive feedback throughout: Selecting the correct manometer / equipment that is in the correct pressure range for the maximum pressure expected.
Pre-use checks.
Global Wind Organisation
www.globalwindsafety.org
129 / 142
Made with FlippingBook Annual report maker