CoHE Appendices V0
3. PRESSURE FLUID SAFETY MODULE
The following equipment is required during the entire duration of this pressure fluid safety module to meet the need of the pressure fluid safety module: • PPE suitable for pressure fluids tasks (Gloves, safety goggles, safety shoes or boots and suitable clothing or overalls) • Pressure gauge/manometer • Lockout-Tagout equipment. As a minimum: o 6 x padlocks o 6 x caution notices / tags • An example of accessories for locking certain components e.g. valve
A pressure fluid system which as a minimum must be able to:
Build pressure Release pressure
• •
Measure pressure (Test points)
•
• Store pressure even with pumps stopped • A way of applying Lockout-Tagout to part of the system
The pressure fluid system should contain at least:
Tank with level indicator Pump with electrical motor
•
•
Directional valve
•
Needle valve
•
Pressure relief valve Non-return valve Pressure switch
•
•
•
Actuator
•
Accumulator
•
Test points
•
Oil
•
Filters
•
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
Global Wind Organisation
www.globalwindsafety.org
142 / 142
Made with FlippingBook Annual report maker