GWO CoHE TRAINING STANDARD V0
Note: Candidates, who already possess the intended knowledge, skills and abilities of the GWO CoHE Training Standard can apply for merit using the GWO merit process.
7.3 Aims and objectives
The GWO CoHE Training Standard will enable participants to manage the risks related to hazardous energies in the wind industry and act safely when in the vicinity of hazardous energies or when working on systems and equipment containing hazardous energies.
7.4 Duration of GWO CoHE Modules
The total contact time for completing the stand-alone modules in this CoHE training standard is estimated to be 26 hours . This is based on the time estimates given in the module timetables and summarised in table 5-6 below.
The training provider must not exceed the hours per day given in table 5-7 below.
The training provider must ensure that sufficient time is allowed for participants with prior experience to share their experiences related to the modules of the CoHE training standard in a way that is constructive for the entire class. Durations stated in the table below are meant as guidance for anyone delivering the training. Variations between individual module duration are acceptable provided they do not compromise the achievement of the objectives for all participants. If the Electrical Safety and Pressure Fluid Safety Modules are delivered as part of a combined training, the common elements of introduction and evaluation may be combined, reducing the total contact time.
Modules
Duration
Basic Safety CoHE Module
4 hours
Electrical Safety Module
14 hours
Pressure Fluid Safety Module
8 hours
Table 5-6 - Duration of the GWO CoHE Modules
Maximum duration per day
Contact time
8 hours
Total training day
10 hours
Table 5-7 - Maximum durations for training days
Global Wind Organisation
www.globalwindsafety.org
15 / 142
Made with FlippingBook Annual report maker