GWO CoHE Training Standard V0
12.4 Equipment for Electrical Safety Module
The equipment required for training (as listed in Annex 1) must be available and must fulfil national, legal requirements of the country where the training is taking place.
12.5 Electrical Safety Module Timetable
Durations stated in the table below are meant as guidance for anyone delivering the training. Variations are acceptable as far as they do not compromise the achievement of the learning objectives for all participants. Within the module timetables, approximate duration of each of the lessons are given. The training provider may choose to deliver elements of the training according to other timetables, as long as the total duration is not reduced, and practical elements are not reduced in length. Theoretical elements may be presented and discussed during the practical exercises and scenarios when it is feasible and beneficial for the training
The order in which the elements of the training module are delivered may vary.
Approx. Duration
Lesson
Element
1 Introduction
1.1
Safety instructions and emergency procedures
1.2
Facilities
1.3
Introduction
1.4
Aim and objectives
1.5
On-going assessment
1.6
Motivation
1.7
Human factors
20 min.
2 Requirements and role of a Qualified Electrical Person
2.1
Requirements and role of a Qualified Electrical Person
TOTAL
45 min.
3 Electrical PPE
3.1
Electrical PPE
TOTAL
30 min.
4 Electrical safe working practices 4.1
Working in accordance with an approved work instruction Working in accordance with the correct revision of electrical diagrams Minimum Electrical PPE and prohibited articles
4.2
4.3
Global Wind Organisation
www.globalwindsafety.org
66 / 142
Made with FlippingBook Annual report maker