GWO CoHE Training Standard V0
Provide constructive feedback to the participants discussions to enable that the participants can discuss the reasons for treating all electrical equipment as live until an electrically safe work condition has been established
ELEMENT 5.2 - WHEN TO ESTABLISH AN ELECTRICALLY SAFE WORK CONDITION
Learning objective:
The participants can discuss the importance of establishing an electrically safe work condition (Knowledge, intermediate level) The participants can explain when to establish an electrically safe work condition (Knowledge, intermediate level)
The instructor shall:
Facilitate group discussions about the importance of establishing an electrically safe work condition:
Brainstorming on what could go wrong, if you open a breaker or an isolation and start working on the components supplied from it?
Possibilities that could happened and could be covered in the group discussion:
i. Selection of the wrong breaker
ii. The breaker is not really isolating
iii. Someone else close the breaker
iv. Stored energy present
v. Backup system
vi. Faulty or deranged equipment
vii. Remote access
viii. Timers
The participant shall:
Engage above group discussion about the importance of establishing an electrically safe work condition
The instructor shall:
Present when to establish an electrically safe work condition i.e. before entering or whenever someone has to enter the Limited Approach Boundary to do a task, there has to be established an electrically safe work condition. Exceptions to this could be:
Switching.
Diagnosing and testing.
Global Wind Organisation
www.globalwindsafety.org
96 / 142
Made with FlippingBook Annual report maker