GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
G ENERAL R EQUIREMENT TO GWO L IFT C OMMISSION , I NSPECTION , I NSTALLATION AND M AINTENANCE TRAINING Upon completion of the GWO Lift Commission, Inspection, Installation and Maintenance Training (LCIIM), participants will be aware of the risks and hazards encountered when doing commissioning, inspection, installation, and maintenance of lifts within the wind industry. Furthermore, they will be able to control and mitigate those risks and hazards. The GWO Lift Commission, Inspection, Installation and Maintenance Training Module will also equip participants with the ability to take responsibility and appropriately respond in the event of a hazardous situation and to increase their safety through proper use of personal protective equipment, emergency equipment, procedures, and safe craftsmanship. Inspecting, installing, and doing maintaining work on lifts in a WTG is dependent of at all times using the relevant manual and technical instructions. Overview The GWO Lift Commission, Inspection, Installation and Maintenance training module is a mix of theoretical and practical elements focusing on developing the needed knowledge, skills, and abilities for a wind technician to work on, to operate and to evacuate a lift in a WTG. The training has a generic focus in relation to different lift types and brands, and the initiative to seek guidance in relevant manuals and directives when needed is a fundamental part of the learning objectives for this training.
Target group
Personnel working on WTGs within the wind industry by commissioning, inspecting, installing, and doing maintaining work on lifts in a WTG.
Aims and objectives Training in accordance with this standard will enable participants to take responsibility to support and care for themselves and others while doing commissioning, inspection, installing, and maintaining work on a lift in the wind industry by possessing the required knowledge, skills, and ability to conduct assigned tasks and operations safely and efficiently. A prerequisite for being able to do this is that the relevant manual and guiding is used at all times.
Duration of Lift Commission, Inspection, Installation and Maintenance Modules
Modules
Duration
Lift Commission, Inspection, Installation and Maintenance theory
14:00 hours / Two days training
Table 5-4 - Duration of the GWO Lift Commission, Inspection, Installation and Maintenance Modules
Maximum duration per day
Global Wind Organisation www.globalwindsafety.org
10 / 71
Made with FlippingBook Ebook Creator