GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Learning objectives:
The participants can perform a function test of the bottom obstruction device (stop in the lowest position) (Skills, intermediate level). The participants can perform a replacement or adjustment of the bottom obstruction device lowering limit switch (Skills, intermediate level). The participants can perform an adjustment of the operational function of the bottom obstruction device (Skills, intermediate level). The participants can perform an adjustment of the bottom obstruction device (stop in the lowest position) (Skills, intermediate level).
The instructor shall:
Demonstrate how to perform a function test, adjustment and replacement of the bottom obstruction device (stop in the lowest position). Facilitate practical exercise on testing, replacing, and adjusting the bottom obstruction device (stop in the lowest position).
Provide feedback to the participants on their performance.
The participants shall:
Engage in practice, share experiences, and apply the received feedback in the following exercises.
Conduct a short questionnaire test to recap the theory and safety issues from lesson 8.
Check own answers and solutions from the shown fact list on completion of the test.
Lesson 9 - LIFT DOOR LOCK / ELECTRICAL INTER-LOCK
20 min.
The aim of this lesson is to enable the participants to test the function of lift door lock and ensure its functionality in accordance with the relevant manuals and inspection lists. After successfully having completed lesson 9 of the Lift Commission, Inspection, Installation and Maintenance Module: The participants can on own initiative take responsibility of function-testing the Lift Door lock / electrical inter-lock according to the relevant manual and instructions (Ability, intermediate level).
Learning objectives:
Global Wind Organisation www.globalwindsafety.org
41 / 71
Made with FlippingBook Ebook Creator