GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Lesson 11 - SUSPENSION/CROSSBEAM
35 min.
The aim of this lesson is to enable the participants to inspect the suspension/crossbeam and report errors and omissions in accordance with the relevant manuals and inspection lists. After successfully having completed lesson 11 of the Lift Commission, Inspection, Installation and Maintenance Module: The participants can take the responsibility for assessing the condition of the suspension/crossbeam, seek guidance in lift manuals and directives and decide relevant and responsible action in case of defects and damages (Ability, intermediate level).
Learning objectives:
The participants can explain how to do a visual inspection of all parts for damage, cracks, corrosion (Knowledge, intermediate level). The participants can explain how to do a visual inspection of all welds for damage and cracks (Knowledge, intermediate level).
The instructor shall:
Present examples of damage, cracks, and corrosion in connection to the suspension/crossbeam and its welds.
Distribute images of examples of damages, cracks and corrosion to the participants and facilitate discussions in pairs on damage, cracks and corrosion and what actions to take, if such are discovered. Each pair should discuss one image for one minute, and then swap the images amongst the participants to initiate discussions on each new image in turn.
The participants shall:
Engage in pairs in discussions inspired by distributed images and share their experiences on damages, cracks and corrosion in connection to the suspension/crossbeam and its welds.
Learning objective:
The participants can explain how to do a visual inspection of the rope end attachment (Knowledge, intermediate level).
The instructor shall:
Present examples of rope end attachments.
Lead or facilitate discussion on rope ends attachments.
Global Wind Organisation www.globalwindsafety.org
45 / 71
Made with FlippingBook Ebook Creator