GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
The aim of this lesson is to enable the participants to test and ensure the functionality of drive and safety ropes and racks in accordance with the relevant manuals and inspection lists. After successfully having completed lesson 12 of the Lift Commission, Inspection, Installation and Maintenance Module:
The participants can explain how to do a visual inspection and replacement of drive and safety ropes according to ISO 4309 (Knowledge, intermediate level).
Learning objectives:
The participants can perform a replacement of drive and safety ropes according to ISO 4309 (Skills, intermediate level). The participants can perform a visual inspection of the diameter of drive rope and safety rope in unloaded state at 3 points: bottom, middle & top (Skills, intermediate level). The participants can explain how to do correct greasing of the drive rope sufficiently, e.g. 0.4 litres of e.g. HHS 2000 per 100 metre rope (Knowledge, intermediate level).
The instructor shall:
Demonstrate how to inspect and replace drive and safety ropes.
Facilitate practical training on inspecting and replacing drive and safety ropes.
Provide feedback to the participants on their performance during the practical training.
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises.
Learning objectives:
The participants can explain how to do a visual inspection on tension weights installations (Knowledge, intermediate level). The participants can explain how to inspect tension weights to have distance/space above (full loaded lift) or below (unloaded lift) in accordance with the relevant manuals - e.g. 250mm (Knowledge, intermediate level). The participants can perform an adjustment on tension weights installations in accordance with the relevant manuals (Skills, intermediate level). The participants can perform an adjustment of the tension weights to have distance/space above (full loaded lift) or below (unloaded lift) in accordance with the relevant manual e.g. 250mm (Skills, intermediate level).
The instructor shall:
Global Wind Organisation www.globalwindsafety.org
47 / 71
Made with FlippingBook Ebook Creator