GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Lead or facilitate discussion on how to do a visual inspection of the rope attachment and bondings.
The participants shall:
Engage in discussions and share experiences on rope attachment and bondings in WTG.
Learning objectives:
The participants can perform an installation and replacement of the protective tube (Skills, intermediate level). The participants can explain how to visually inspect whether the protective tube is mounted (Knowledge, intermediate level). The participants can explain how to do a visual inspection of the rope protections installed at the rope guides (landing feed through) (Knowledge, intermediate level). The participants can perform a replacement of the rope protections installed at the rope guides (landing feed through) (Skills, intermediate level).
The instructor shall:
Present examples of different rope protection systems.
Demonstrate examples of how to install and replace different rope protection systems.
Facilitate practical training on how to replace rope protections.
Provide feedback on participants performance during the practical training.
The participants shall:
Engage in the practical training and reflect upon the received feedback.
Conduct a short questionnaire test to recap the theory and safety issues from lesson 12.
Check own answers and solutions from the shown fact list on completion of the test.
Learning objectives:
The participants can describe how to check the rack (Knowledge, basic level).
The participants can describe how to function test the operation of the rack proximity detector (Knowledge, basic level). The participants show interest in seeking guidance in the relevant manuals if excessive wear on the rack is detected (Ability, basic level).
The instructor shall:
Global Wind Organisation www.globalwindsafety.org
50 / 71
Made with FlippingBook Ebook Creator