GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
The participants can perform an installation of the wire in the traction hoist in the lift (Skills, intermediate level).
The instructor shall:
Demonstrate how to install a traction hoist and mount the wire in the traction hoist.
Facilitate practical training on installing a traction hoist and wire.
Provide feedback to the participants on their performance during the practical training.
The participants shall:
Engage in practice, share experiences, and apply the received feedback in following exercises.
Learning objectives:
The participants can describe how to do a visual inspection of the status on operation hour counter of the hoist (Knowledge, basic level). The participant can describe an inspection of the hoist operation hour counter and rectify any issues following work instruction and lift maintenance manuals (Knowledge, basic level).
The instructor shall:
Present examples of hoist operation hour counters.
Present examples of hoist operation hour counter issues, where rectifying action was needed.
Lead or facilitate a discussion on how to inspect hoist operation hour counters.
The participants shall:
Engage in discussions and share experiences on hoist operation hour counters.
Learning objectives:
The participants can explain how to install labels (in case of country specific labels) (Knowledge, intermediate level). The participants can explain how to do visual inspection of labels and type plates (Knowledge, intermediate level).
The instructor shall (with reference to lift manuals and instructions):
Present examples of labels and type plates.
Demonstrate how to install labels.
Global Wind Organisation www.globalwindsafety.org
52 / 71
Made with FlippingBook Ebook Creator