GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Lead or facilitate discussion on how and what to inspect in relation to labels and type plates.
The participants shall:
Engage in discussions and share experiences on how to apply labels as well as how and what to inspect in relation to labels and type plates.
Learning objectives:
The participants can perform a removal and installation of the hoist following the relevant manuals (Skills, intermediate level). The participants can explain how to lubricate traction sheave gears (Knowledge, intermediate level). The participants can perform a visual inspection of an attachment to the lift (Skills, intermediate level). The participants can perform a wear test of the centrifugal brake (speed test, downwards velocity during emergency descent) e.g. with 2 persons max. 26 m/min (Skills, intermediate level). The participants can describe how to do a visual inspection for leaks on drive unit and report according to the relevant lift manuals or instruction (Knowledge, basic level).
The instructor shall:
Demonstrate examples of:
How to remove and install a hoist.
How to lubricate the gear.
How to inspect the attachment to the lift.
How to do a wear test of centrifugal brake.
How to check the operation of motor break at top- and bottom drive unit.
How to do a speed test during emergency descent.
How to do a visual inspection for leaks on drive unit and report in case of leaks.
Facilitate practical training on:
How to remove and install a hoist.
How to lubricate the gear.
How to do a wear test of centrifugal brake.
How to do a speed test during emergency descent.
Global Wind Organisation www.globalwindsafety.org
53 / 71
Made with FlippingBook Ebook Creator