GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Note: The practical training may be conducted as rotation training, where the participants practise the individual topics in pairs changing topic every 5 minutes (or any duration fitting the learning plan).
The participants shall:
Engage in the practical training, share experiences on hoist and drive units, and apply the received feedback in following learning activities.
Learning objectives:
The participants can explain how to do a visual inspection of the wiring (El) to drive unit (Knowledge, intermediate level). The participants can perform an installation and replacement of the wiring (El) to drive a unit in accordance with the relevant manual (Skills, intermediate level).
The instructor shall:
Present examples of wiring (El) to drive units.
Demonstrate how to install and replace wiring (El) to a drive unit.
Facilitate practical training on how to install and replace wiring (El) to drive a unit and provide feedback on participants performance. Lead or facilitate discussion on safety when inspecting, installing, and replacing wiring (El) to a drive unit.
The participants shall:
Engage in the practical training and following discussions, share experiences on wiring (El) to a drive unit, and reflect on the received feedback.
Learning objective:
The participants can describe how to do a visual inspection for oil leaks in the upper and lower gear box (Knowledge, basic level).
The instructor shall:
Present examples of how to inspect the upper, and lower, gear box.
Present examples of oil leaks in the upper, and lower, gear box.
Lead or facilitate discussion on how to react if oil leaks in the upper, or lower gear box are detected.
The participants shall:
Global Wind Organisation www.globalwindsafety.org
54 / 71
Made with FlippingBook Ebook Creator