GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
The instructor shall (with reference to lift manuals and instructions):
Present examples of labels and type plates.
Demonstrate how to apply labels.
Lead or facilitate discussion on how and what to inspect in relation to labels and type plates.
The participants shall:
Engage in discussions and share experiences on how and what to inspect in relation to labels and type plates and how to apply labels.
Learning objectives:
The participants can perform an installation of a fall arrest device (Skills, intermediate level). The participants can explain how to do a visual inspection of the general condition of a fall arrest device (Knowledge, intermediate level). The participants can explain how to do a visual inspection of wear on intake bushing (Knowledge, intermediate level). The participants can explain how to do a visual inspection of the electrical wiring (Knowledge, intermediate level). The participants can explain how to do a visual inspection of the centrifugal system as described in the relevant manual (Knowledge, intermediate level). The participants can describe how to install pinch- and centrifugal pulley in relation to relevant manual and directions (Knowledge, basic level). The participants can perform function and Wear test of pinch- and centrifugal pulley (Skills, intermediate level).
The instructor shall:
Present key points in relation to the inspection of the general condition of fall arrest devices in different lift types.
Demonstrate how to install different types of fall arrest devices.
Facilitate practical training on installation of a fall arrest device and provide feedback to the participants on their performance. Lead or facilitate discussion on differences between different fall arrest devices in different lift types.
The participants shall:
Global Wind Organisation www.globalwindsafety.org
57 / 71
Made with FlippingBook Ebook Creator