GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
EQUIPMENT LIST
The equipment required for training must be available and must fulfil national legal requirements where applicable. The following tools, materials and equipment are needed for the execution of the course:
Training facility:
a) Lift, lift mock-up or lift simulator requirements in detail. a. Functional lift setup including: i. Traveling distance must allow for test, inspection and work on relevant top and bottom obstruction devices and other relevant safety devices, mechanical devices and rescue systems as stated in the relevant lift manual. ii. Gate/fence with original lock system. Additional mechanical and electrical lock systems must be visualised in illustrations. iii. Relevant operation/user manuals, maintenance manuals, installation manuals and inspection manuals. iv. Example of daily inspection sheet. v. Example of logbook. vi. Tools, as needed, for the daily inspection, commission inspection, pre- assembly/installation, and maintenance of lifts. b) Show and tell parts or visuals from relevant manufacturers covering wire/rope guided, ladder guided and rack and pinion lift systems other that the functional training lift. To include: i. Hoist. ii. Electro-mechanical brakes and the centrifugal brakes. iii. Safety brake systems. iv. Obstruction systems etc. v. Bowden cable installation to practise adjustments. vi. Guiding systems (cable/wire, rack and pinion, fixed). vii. Communications systems.
c) Manuals covering relevant brands/types/manufacturers and lift systems.
d) Daily inspections sheet for relevant lift brand and lift systems.
e)
PPE See table A3-31 (below).
Global Wind Organisation www.globalwindsafety.org
62 / 71
Made with FlippingBook Ebook Creator