GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards listed in table A3-3. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
Country Specific Equipment Standards
Equipment
Europe
North America
China
United Kingdom
EN 361 Or EN 813
ANSI Z359.3 ANSI Z359.11 OSHA 1926.28 ANSI Z359.1-2 OSHA 1910.28 OSHA 1910.29 1926 Subpart M ANSI Z359.3 OSHA 1910.28 OSHA 1910.29 1926 Subpart E OSHA 1910.1333 OSHA 1926.28
BS EN 361 Or BS EN 813
Full Body Harness
GB 6095 GB/T 6096
Work Restraint Lanyards
EN 358
BS EN 358
Fixed length Fall arrest lanyards
EN 355
GB 24543
BS EN 355
GB 2811 GB/T 2812
Helmets
EN 397+A1
BS EN 397+A1
EN 353-1+A1 EN 353-2 EN 1891 EN 892
BS EN 353-1+A1 BS EN 353-2 BS EN 1891 BS EN 892
GB 24542 GB/T 24537
Vertical fall arrest systems
ANSI Z359.1-2 OSHA 1910.28 OSHA 1910.29 1926 Subpart M
EN 360
GB 24544
BS EN 360
SRL
EN 795
GB 30862
BS EN 795
Anchor Points
GB/T 30587 GB/T 20118
Slings
EN 566
BS EN 566
Karabiners
EN 362
GB/T 23469
BS EN 362
EN 341 and EN 1496
BS EN 341 and BS EN 1496
Evacuation / Rescue devices
ANSI Z359.4
BS EN 131-2 and BS EN 14122-4
EN 131-2 and EN 14122-4
GB/T 17889.1 GB/T 17889.2
Vertical aluminium ladders
Table A3-31 - Country specific equipment standards Working at Heights
Global Wind Organisation www.globalwindsafety.org
63 / 71
Made with FlippingBook Ebook Creator