GWO Lift Commission, Inspection, Installation and Maintenance Training Standard V0
2021-09-30_TS_LCIIM_V0
New element 4.4 Upper and lower hatches. Learning objective: The participants can describe how to function test Operation of switches on upper and lower hatches (Knowledge, basic level) Element 5.1 New Learning objective and learning activities added: The participants show interest in checking that the Start-up and Maintenance certification adhesive signs are current and completed with correct dates (Ability, basic level)
New Element 6.1 Introductions to Lift guiding systems
Element 6.3 New Learning objectives and learning activities added: The participants can describe how to check guide wheels (Knowledge, basic level) Element 6.5 New Learning objectives and learning activities added: The participants can describe how to do visual inspection of the omega flanges of the ties to step of ladder are not cracked or broken in the folds (Knowledge, basic level) Element 6.5 New Learning objectives and learning activities added: The participants can recognise that upper and lower braking skates are clean and firmly connected to the ladder (Knowledge, basic level) New Element 9.3 Upper and lower hatches. Learning objectives: The participants can describe how to do visual inspection of the placement of the pins in the axes of the upper and lower hatches (Knowledge, basic level) The participants can describe how to inspect the operation of the magnet system or latch on the upper hatch (Knowledge, basic level) The participants show interest in ensuring, that the handle strings of the upper and lower hatches are properly installed and have the correct length (Ability, basic level) Element 10.1 section 10.1.1 Added: . . . Maneuver panels in and outside lifts as well as at the lift base of the WTG and at the nacelle New Element 10.3 Emergency Rescue System. Learning objectives: The participants can describe how to function test the Emergency Rescue System (Knowledge, basic level) Element 11.1 New Learning objective and learning activities added: The participants can describe how to do visual inspection of the Upper And lower attack pinion (Knowledge, basic level) Element 12.3 New Learning objective and learning activities added: The participants can explain how to do visual inspection of the upper and lower counter rollers (Knowledge, intermediate level Element 12.7 New Learning objectives and learning activities added: The participants can describe how to check the rack (Knowledge, basic level) The participants show interest in seeking guidance in the relevant manual in case of detecting excessive wear on the rack (Ability, basic level) Element 12.8 New Learning objective and learning activities added: The participants can describe how to grease the rack and the pinion (Knowledge, basic level) The participants can describe how to function test the operation of the rack proximity detector (Knowledge, basic level) Element 12.9 New Learning objectives and learning activities added: The participants can describe how to grease the rack and the pinion (Knowledge, basic level)
Global Wind Organisation www.globalwindsafety.org
7 / 71
Made with FlippingBook Ebook Creator