Sawing festoolusa .com 81
TSC 55 KEB - 6.25” (160mm)
$25.00
499011
TS 55 REQ Flush-mount Splinterguard protects material surface for both straight and bevel cuts. Splinter guard (5 pieces)
Set stop points on the Guide Rail for repeat cuts and plunge-cuts. In fi nitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts. Limit Stop Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Rip capacity from the blade side to 11-13/16” (30 0 m m) and on the motor side to 3-3/4” (9 5 m m). Parallel Side Fence $71.00 $15.00 Encloses blade housing for improved dust extraction when cutting vertically or overhead. Can also be used for creating architectural false joints. Cover Plate $70.00
491582
491469
491750
Keep the work space clean by virtually collecting all dust. When not in use bag folds down for space-saving transportation and storage. Includes a dust cap. Dust Bag $45.00 500393 202480 Powerful 5.2 Ah battery for endurance and power. The all-rounder for all applications. Integrated LED display on the battery pack provides charge status at all times. Bluetooth® enables the compatible CLEANTEC mobile dust extractor to be started automatically when the cordless tool is activated. Rapid Charger TCL 6 $75.00 201138 Battery Pack BP 18 Li 5.2 ASI $130.00 For Li-ion battery packs (except for CXS/TXS). LED display shows the remaining battery life and charge status. Space-saving with a secure cord holder. Simple wall mounting through elongated holes on the rear. 200313 Faster re-charge for less down time. AIRSTREAM batteries with the SCA 8 charger re-charge 60% faster than previous charging technology. And batteries equipped with AIRSTREAM design cool down 3X faster than non-equipped versions, so the charging process can begin sooner, getting you back to work faster. Rapid Charger SCA 8 $100.00
TS 75 EQ - 8.25” (210mm)
TS 75 EQ Splinter-free cross cuts in a single pass thanks to the off-cut side Splinterguard and integrated Guide Rail Splinterguard. TS 75 Splinter guard (5 pieces) $25.00 Set stop points on the Guide Rail for repeat cuts and plunge-cuts. In fi nitely adjustable placement along the entire rail. Reduces the risk of kickback when initiating plunge-cuts. Limit Stop $15.00
491473
491582
$71.00
492243
Parallel Side Fence
Create parallel cuts from an edge. Can be used on both sides of the saw. Flip it over and it becomes an extension table. Rip capacity from the blade side to 11-13/16” (30 0 m m) and on the motor side to 3-3/4” (9 5 m m).
Made with FlippingBook - Online catalogs