EASY, LOW COST DEWATER I NG SOLUT I ON ! TITAN TUBES
TITAN TUBES EASY, LOW COST DEWATERING SOLUTION!
Titan Tubes are designed for dewatering and/or desludging in a variety of applications from wastewater treatment, to environmental remediation, mine processing and more. Made of high- strength woven geotextile fabric these tubes allow liquids to filter through its pores for collection, leaving behind only solid particles. They essentially work to separate the solids from liquids for simple containment. Titan Tubes resist ultraviolet deterioration, rotting, and biological degradation, and are inert to most naturally encountered chemicals, alkalis, and acids. They are simple to use, low cost and an effective dewatering solution for both large and small scale projects.
HOW IT WORKS:
1. TUBE FILLS Sludge is pumped into the tube until it is full.
2. DEWATERING OCCURS Liquid filters through the tube pores and the solids begin to collect.
3. SOLIDS REMAINS As liquid escapes, the solids consolidate in the tube for eventual disposal.
FEATURES:
BENEFITS:
APPLICATIONS:
• Cost effective alternative to traditional materials.
• Made from high strength woven geotextile.
ENVIRONMENTAL REMEDIATION Management of contaminated sediments from industrial run-off, or other into waterways. WATER & WASTEWATER TREATMENT Extraction of bio-solids in lagoons and stabilizations ponds. INDUSTRIAL PROCESSING Management of contaminated sediments, sludge or processing agents in pulp and paper mills or other. MINING & MINERAL PROCESSING Management of heap leach, slag tailings or other processing materials.
• Easy to transport, set-up, and install.
• Available in different fabrics to meet your flow rate needs and strength requirements. • Custom manufactured in 15, 30, 45, and up to 120’ circumferences in 15’ increments with standard lengths of 100, 200, and 300 ft for a variety of projects.
• Efficient.
• High strength & stress resistant.
• Can be left in place and used for erosion control.
• Reduces pumping distances.
• Assortment of colors options.
• Minimal impact on the environment.
• Fabricated from high strength woven geotextile.
OUR TITAN TUBE PROJECTS:
WATER & WASTEWATER TREATMENT
• TOWN OF INVERMERE LAGOON (Invermere, British Columbia)
• TOWN OF OSOYOOS LAGOON (Osoyoos, British Columbia)
• WEST HAWK LAKE SEWAGE LAGOON (West Hawk Lake, Manitoba)
• BELMONT LAGOON
(Belmont, Manitoba)
• COMMUNITY OF BARROWS WASTEWATER STABILIZATION POND (Barrows, Manitoba)
• HECLA ISLAND SEWAGE LAGOON (Hecla Island, Manitoba)
• BANNOCK POINT REHABILITATION CAMP LAGOON (Whiteshell Provincial Park, Manitoba)
• CRYSTAL CITY STABILIZATION POND (Crystal City, Manitoba)
• RUSSELL STABILIZATION POND (Russell, Manitoba)
• GEMACO ENERGY LAGOON
(Coldstream, British Columbia)
MINING & MINERAL PROCESSING
ENVIRONMENTAL REMEDIATION
• AGRIUM
• HAZCO ENVIRONMENTAL SERVICES (Winnipeg, Canada)
(Redwater, Alberta)
• AGRIUM
• ERCO WORLDWIDE
(Fort Saskatchewan, Alberta)
(Saskatoon, Saskatchewan)
WATER & WASTEWATER
LAGOON DESLUDGING
TEMPORARY LEACHATE WATER CONTAINMENT
WHERE: Invermere Lagoon (Invermere, British Columbia)
WHERE: Beaver Municipal Landfill (Ryley, Alberta)
WHAT: Over time the accumulation of bio-solids in municipal lagoons affects holding capacity which requires desludging. In this project, Titan Tubes were used to remove bio-solid sludge with the objective of increasing the lagoon’s capacity. Slurry from the lagoon was pumped into approximately 6- 60’x100’ Titan Tubes, which were contained in a temporary sloped berm lined with 20 mil Titan TRP-200R geomembrane. As the tubes dewatered, the liquid flowed into a depressed sump area where it was pumped out and the bio-solids remained in the tubes for disposal after drying.
WHAT: Titan was hired to construct a new landfill cell at Beaver Municipal Landfill as part of an expansion project. During this time, the area experienced heavy rains that washed out containment berms in the existing cell. This caused leachate water to flow into an area of the new cell that we were constructing. An immediate solution was needed. Our custom-made Titan Tubes proved to be a quick and cost-effective way to contain this leachate water. The tubes were constructed on-site and successfully stored a total of 450,000 gallons of leachate water which was then treated and discharged into a storage pond outside of the landfill cell. The landfill kept the bags and stored them for re-use if required. WHY TITAN: We were asked to provide a quick solution to the unforeseen problem and were able to respond immediately. This was a valuable solution to the client as it prevented them from having to shut down their operation and allowed us to continue work on the new cell while minimizing delays.
WHY TITAN: Not only did titan supply the Titan Tubes but we
successfully completed the desludging project, which had been abandoned by the previous contractor, and offered value-added service by lining the temporary berm. Because of this and the client’s satisfaction with our work, we were later contracted to re-line the lagoon cell which we also completed successfully.
TITAN TUBE 30 | TITAN TUBE
Titan Tube 30 is manufactured using high tenacity polypropylene yarns that are woven to form a dimensionally stable network, which allows the yarns to maintain their relative position. Titan Tube 30 resists ultraviolet deterioration, rotting and biological degradation and is inert to commonly encountered soil chemicals.
MARV VALUE ENGLISH (METRIC)
TEST PROPERTY
TEST METHOD UNIT ENGLISH (METRIC)
Grab Tensile Strength
ASTM D 4632
lbs (N)
600 x 700 (2670 x 3115)
Elongation
ASTM D 4632
%
15 x 15
Wide Width Tensile
ASTM D 4595
lbs/ft (kN/m)
4800 x 7200 (70 x 105.1)
Wide Width Elongation
ASTM D 4595
%
14 x 9
Wide Width Tensile Strength at 5% Strain ASTM D 4595
lbs/ft (kN/m)
1200 x 2640 (17.5 x 38.5)
CBR Puncture
ASTM D 6241
lbs (N)
2400 (10675.7)
Trapezoidal Tear
ASTM D 4533
lbs (N)
180 x 275 (801 x 1223)
UV Resistance (at 500 hrs)
ASTM D 4355
%
80%
Apparent Opening Size (AOS)*
ASTM D 4751
US Std Sieve (mm)
40 (0.425)
Permittivity
sec -1
0.26
ASTM D 4491
Water Flow Rate
gpm/ft 2 (L/min/m 2 )
20 (815)
ASTM D 4491
STANDARD TUBE SIZES (CUSTOM SIZES AVAILABLE UPON REQUEST)
Circumference
ft
15, 30, 45, 60, 75, 90
Length
ft
100, 150, 200
*Maximum average roll value.
This data is provided for informational purposes only. Titan makes no warranties as to the suitability or the fitness for a specific use or merchantability of the products referred to, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability from resulting loss or damage. This information is subject to change without notice, please check with us for current updates.
TITAN ENVIRONMENTAL CONTAINMENT
Toll free: 1-866-327-1957 / Email: info@titanenviro.com / Web: www.titanenviro.com
TRUST. QUALITY.VALUE
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6Made with FlippingBook Online newsletter