Product
Product description: This EPD is representative of Crown Trade Acrylic Gloss.
Crown Trade Acrylic Gloss is a quick drying durable gloss for use on interior wood and suitably primed metal. The formulation has excellent flow and levelling properties and stays whiter for longer. Whilst this product has been formulated for interior use it can also be used on exterior surfaces. It is used for suitably prepared wood and metal surfaces. Product specification Materials Value Unit Additives 10 - 20 % Binder 45 - 55 % Filler < 5 % Pigments 20 - 30 % Water < 10 % Packaging Value Unit Packaging -- Plastic (PP) 0.05 kg
Technical data:
Property
Value, Unit 1.274 kg/L
Relative density Solids by volume
40.84 % 130 g/L 67.8 g/L 16 m2/L
EU VOC limit value for product
Product VOC max
Theoretical spreading rate
Dry film thickness Wet film thickness
27 μm 63 μm
Market: UK and Ireland
Reference service life, product Dependent on usage and application Reference service life, building or construction works Not relevant LCA: Calculation rules
Declared unit: 1 kg Crown Trade Acrylic Gloss Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below.
Materials Additives
Source
Data quality
Year 2024 2024 2024 2024 2024 2024 2024 2024
CEPE RM Database v4.0 CEPE RM Database v4.0 CEPE RM Database v4.0 CEPE RM Database v4.0 CEPE RM Database v4.0 CEPE RM Database v4.0 CEPE RM Database v4.0 CEPE RM Database v4.0
Database Database Database Database Database Database Database Database
Binders and Resins
Hempel average rheology modifier
Hempel average solvent Hempel average surfactant
Others
Pigments and Fillers
Solvent
3 / 11
Made with FlippingBook. PDF to flipbook with ease