SAFE CARE & USE
Smooth folds & wrinkles out of covers before placing on bearing points. 1
Squeeze both paths together to fit sling into fitting. 2
When rigging a vertical hitch with a long sling don't pull the slack side out with the crane
Equalise the slack side by hand
Adjust slack out by hand. 3
Equalise the slack side by hand. 4
Do not place the identification tag on the bearing point
Identification should be placed 18"-24" away from the bearing point and facing away from the load
Sling paths should be smooth in the choker hitch without any twisting. 5
Place sling identification 45 - 60cm away from bearing point & facing away from load. 6
When placing multiple Twin-Path ® slings in hardware place the slings directly on top of each other or side by side
Place slings directly on top or side by side of each other.
8 Use sling protection over the pin to protect the sling from cutting on the edges of the shackle's holes.
7
Twin-Path ® Slings | Beaver Brands
11
Made with FlippingBook HTML5