Complete Arch Manual

Cabinet Specifications

3. Epoxy Resin Sinks: a. Mold sinks from thermosetting epoxy resin.

b. Mold interior corners to radius and slope sink base to drain outlet. 1) Provide 1-1/2 inch (38 mm) outlet with open ended standpipe. a) Standpipe overflow 2 inches (50 mm) shorter than depth of sink. c. Unless otherwise indicated fabricate sinks of drop-in design supported by upper flange from worksurface. 1) Color. a) Match adjacent worksurface.

2.06 SERVICE FITTINGS AND ACCESSORIES A. MATERIALS: 1. Laboratory Service Fittings:

Service fittings shall be laboratory grade, and water faucets and valve bodies shall be cast red brass alloy or bronze forgings, with a minimum content of 85%. All fittings shall be chromium plated unless specified otherwise. 2. Plastic Coated Finish (Sepia Bronze): When specified, laboratory service fittings shall have an acid resistant plastic coating applied over a fine sand-blasted surface. Surfaces shall be sprayed and baked three times with a minimum thickness of .0005 to .0010 mils. (See Performance Ratings). 3. Service Indexes: Fittings shall be identified with service indexes in the following color coding: Hot Water ..........Red

Cold Water ........Dark Green Gas ....................Dark Blue Air ......................Orange Vacuum .............Yellow Distilled Water....White Steam ................Black Nitrogen .............Brown Oxygen ..............Light Green Hydrogen...........Pink Special Gases. Light Blue

B. CONSTRUCTION: 1. Water Fittings:

Water fittings shall be provided with a renewable unit containing all operating parts which are subject to wear. The renewable unit shall contain an integral volume control device and all faucets shall be capable of being readily converted from compression to self-closing, without disturbing the faucet body proper. Four (4) arm forged brass handles shall contain plastic screw-on type colored service index buttons. 2. Steam Fittings: Steam fittings shall have a black, heat resistant composition handle, and shall be the heavy pattern design with stainless steel removable seat and flat Teflon seat disc. They shall have Teflon impregnated packing, and shall be so constructed that they can be repacked under pressure.

12 35 53.19 Wood Laboratory Casework

130

DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663

Made with FlippingBook interactive PDF creator