Casework Installation
B. If the damage cannot be repaired locally, forward the noted freight bill or the concealed damage report to Diversified Casework, along with information giving the Item and Section Number of the part that is damaged. Please refer to installation prints for Item and Section Numbers for each piece. C. Damaged Tops: If damage occurs to tops, handle the same as damage to furniture. A packing list covering the top material shipped to you is included in crate No. 1 of the original shipment from the manufacturer. It will enable you to refer to the crate needed for each item. We realize that different items are sometimes packed in one crate, but like sizes force us to do this to reduce crating expense. Please refer to installation prints for piece marking if breakage or damage occurs. INSTALLATION Your furniture is designed to make installation as easy as possible. All necessary scribe strips, fillers and other parts are furnished as ordered to allow you to achieve a complete and finished laboratory installation. Be sure to study your prints and packing lists carefully before starting installation of any furniture. This Installation Manual should also be read thoroughly before installation begins. To aid you in segregating the units required to make up a complete item, each piece of furniture is identified with the Order Number, Part Number, Room and Elevation Number. Hardware and plumbing fixtures are cartoned and the carton number can be found on the packing list. We recommend that you check the contents of each carton against the packing list and report any discrepancies to your local Diversified Casework dealer promptly. We also recommend that the hardware and plumbing fixtures be locked up until installed. Much time and effort can be saved if the units are segregated as they are unpacked and moved to the approximate location where they are to be installed. The packing lists should be carefully checked during the unpacking process to prevent loose items from being thrown away with the packing material. Any discrepancies between packing slip and material actually received must be reported to Diversified Casework within five(5) working days from receipt of shipment. Each piece of furniture is identified with the Order Number, Part Number, Room and Elevation Number. On lower cabinets and apron sections, the identification will be on top of the unit or on a tag attached to the cabinet back. On other pieces, a tag will be attached or the Part Number shown on an exposed place on the part. Refer to the installation prints and find the corresponding section or cabinet number and place the cabinets in their approximate final location. NOTE: Wood table tops are subject to warpage and end checking if stored improperly prior to installation. They should be stored in a dry place on a level surface. Place wood strips between tops, at intervals of not more than four feet along the length of the top and crossway to the grain of the top. Cover tops with a protective covering to minimize damage. NOTE: Before starting the actual casework installation, check the scribe and filler type you have against the trim section of this booklet, as it is necessary for some types of trim to be installed prior to setting cabinetry.
148
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
Made with FlippingBook interactive PDF creator