Casework Installation
APRON INSTALLATION Where an apron section is suspended between two cabinets or between wall and cabinet, fasten the apron to the cabinet. Be sure apron is set back 1/8” from the face of the unit for steel and 1/4” for wood. When an apron is to be fastened to the wall, fasten as shown in Figure 9. Be sure top of apron is flush and level with adjacent cabinet. If the apron is supported by a cabinet on one end and legs on the other, install the legs before fastening the apron to the cabinet.
LEG ASSEMBLY INSTALLATION (WOOD) Apron legs are shipped knocked down to conserve shipping space and are assembled as shown in Figure 10.
Lay the apron section bottom side up on a pad or other suitable protective material to protect the top finish. Set the leg in position with the projecting leg bolts through the holes in the corner brace. Install the washer and nut and tighten securely. Repeat this step until all legs for a given apron section have been installed.
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
153
Made with FlippingBook interactive PDF creator