Sinks
MOBILE HOT WATER STATION Mobile unit that provides hot or cold water where you need it. Base: Constructed of oak or maple hardwood and veneers with earth-friendly UV finish. Tanks: 5-gallon fresh water and 6-gallon wastewater tank; NSF, UL and FDA: Water heats up to 10 to 15° warmer than fresh tank (room temperature starting water recommended). Laminate Top: 1-1/4" particle board with HPL top and phenolic backer. Electric: Electricity required; Includes duplex outlet and extension cord. Features: Stainless steel sink with hot- and cold-water mixing faucet, water heater, and pump. Feet: 4” locking casters.
ITEM # SIZE HWS-3624 HPL 36”W x 24”D x 36” TOP
HWS-3624
MOBILE HAND-WASHING STATION Essential hand-wash station that moves where you need it – no electricity needed! Base: Constructed of oak or maple hardwood and veneers with earth-friendly UV finish. Tanks: 36”H unit has four 5-gallon tanks; 30”H has four 2-1/2-gallon jugs – two fresh water and two waste tanks; one foot pump. Foot Pump: Choose 1 or 2 foot pumps. Top: 36”H unit has 3/4" phenolic resin top; 30”H has 1-1/4" particle board with HPL top and phenolic backer. Features: Stainless steel sink, gooseneck faucet with lab style nozzle tip, two-cabinet doors (one on each side), quick connect fittings for switching between fresh-water tanks and raised paper towel rod (one per single unit, two per double unit). Feet: 4” locking casters. Overall Dimensions: 24”W x 24”D x 30 or 36”H
STYLE # FOOT PUMPS HEIGHT WSP 1- 30 2- 36
WSP2-36
Foot Pump
KINETIC CLEAN-UP SINK Features molded polyolefin sink that is easy to clean, extremely chemical-resistant and impact resistant. Base: Constructed of oak or maple hardwood and veneers with an earth-friendly UV finish; Back panel unfinished with plumbing cut-out Storage: Locking doors with adjustable shelves in outer cabinets Top: Polyolefin top with long-grooved sloping counter leading to large sink (24-1/2"W x 18-1/2"D x 14"H) Features: Low temperature strength (eliminates cracking from dry ice), hot and cold- water mixing faucet
Toe Kick: Rubber base molding with metal corners Overall Dimensions: 55-1/2"W x 28"D x 36-1/2"H ITEM # TOP OVERALL 3303_ Polyolefin 55-1/2"W x 28"D x 36-1/2"H _ Hardwood Option: M - Maple or K - Oak
3303K
6 GALLON DILUTION TANK Unit designed for easy access to clean and recharge. May also be used as plaster or sedimentation recovery unit. Red screw cap signals unit as part of acid waste system and allows for easy cleaning. 6 Gallon capacity. NEUTRALIZATION CHIPS Limestone (marble) chips or lumps are used in numerous applications to help neutralize and/or dilute chemical bearing wastes (e.g., acid wastes).
INSTALLATION KIT The installation kit allows you to connect the 6 Gallon Dilution Tank to a sink outlet. The kit comes with 12” of pipe and can be modified on-site to fit. ADJUSTABLE RISER BOTTLE TRAP Special antisyphon action and additional bowl capacity.
100186
100185
ITEM #
DESCRIPTION
100185
Dilution Tank
100186 Installation Kit 100187 Neutralization Chips 100188 Adjustable Riser Bottle Trap
100188
100187
60
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
Made with FlippingBook interactive PDF creator